#!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## ####################################################################################### ## Network CDP ## ####################################################################################### static.network.cdp.enable = static.network.cdp.packet_interval = ####################################################################################### ## Network IPv6 ## ####################################################################################### static.network.ipv6_static_dns_enable = static.network.ipv6_icmp_v6.enable = static.network.ipv6_secondary_dns = static.network.ipv6_primary_dns = static.network.ipv6_internet_port.gateway = static.network.ipv6_internet_port.ip = static.network.ipv6_internet_port.type = static.network.ipv6_prefix = ####################################################################################### ## Hostname ## ####################################################################################### static.network.dhcp_host_name = ####################################################################################### ## Network Internet ## ####################################################################################### static.network.ip_address_mode = static.network.vlan.pc_port_mode = static.network.static_dns_enable = static.network.pc_port.enable = static.network.primary_dns = static.network.secondary_dns = static.network.internet_port.gateway = static.network.internet_port.mask = static.network.internet_port.ip = static.network.internet_port.type = ####################################################################################### ## Network Advanced ## ####################################################################################### ##It configures the transmission mode and speed of the Internet (WAN) port. ##0-Auto Negotiate ##1-Full Duplex 10Mbps ##2-Full Duplex 100Mbps ##3-Half Duplex 10Mbps ##4-Half Duplex 100Mbps ##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) ##The default value is 0.It takes effect after a reboot. static.network.internet_port.speed_duplex = ##It configures the transmission mode and speed of the PC (LAN) port. ##0-Auto Negotiate ##1-Full Duplex 10Mbps ##2-Full Duplex 100Mbps ##3-Half Duplex 10Mbps ##4-Half Duplex 100Mbps ##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) ##The default value is 0.It takes effect after a reboot. static.network.pc_port.speed_duplex = ##It enable or disable to use A record of TTL ##The defalue value is 1;0-Disable 1-Enable static.network.dns.ttl_enable = ##It configures the LAN MTU ##The default value is 1500,.Integer from 128 to 1500.It takes effect after a reboot. static.network.mtu_value = static.network.dhcp.option60type = static.network.dns.last_cache_expired.enable = static.network.dns.last_cache_expired = static.network.dns.query_timeout = ####################################################################################### ## VLAN ## ####################################################################################### static.network.vlan.internet_port_priority = {$yealink_vlan_cos} static.network.vlan.internet_port_vid = {$yealink_vlan_id} {if isset($yealink_vlan_enable)}static.network.vlan.internet_port_enable = {$yealink_vlan_enable}{else}static.network.vlan.internet_port_enable = 0{/if} static.network.vlan.pc_port_priority = {$yealink_vlan_pc_cos} static.network.vlan.pc_port_vid = {$yealink_vlan_pc_id} {if isset($yealink_vlan_pc_enable)}static.network.vlan.pc_port_enable = {$yealink_vlan_pc_enable}{else}static.network.vlan.pc_port_enable = 0{/if} static.network.vlan.dhcp_enable = static.network.vlan.dhcp_option = ##It configures LLDP or manually VLAN can't obtain IP, whether to switch to other methods of VLAN or closed VLAN to get IP ##(Except T19P/T21P Models) 0-Disable 1-Enable static.network.vlan.vlan_change.enable = ####################################################################################### ## WEB Port ## ####################################################################################### ##It configures the HTTP port for web server access. ##The default value is 80.It takes effect after a reboot. static.network.port.http = ##It configures the HTTPS port for web server access. ##The default value is 443.It takes effect after a reboot. static.network.port.https = static.wui.https_enable = static.wui.http_enable = ####################################################################################### ## QoS ## ####################################################################################### ##It configures the audio QoS. ##The default value is 46.It takes effect after a reboot.Integer from 0 to 63 static.network.qos.audiotos = ##It configures the SIP QoS. ##The default value is 26.It takes effect after a reboot.Integer from 0 to 63 static.network.qos.signaltos = ##It configures the video QoS. ##The default value is 34.It takes effect after a reboot.Integer from 0 to 63 static.network.qos.videotos = ####################################################################################### ## 802.1X ## ####################################################################################### static.network.802_1x.mode = static.network.802_1x.identity = static.network.802_1x.md5_password = static.network.802_1x.root_cert_url = static.network.802_1x.client_cert_url = ##It configure the mouth of the PC 802.1 x - logoff function.It takes effect after a reboot. ##The default value is 0-Dsable , 1-Enable static.network.802_1x.proxy_eap_logoff.enable = static.network.802_1x.eap_fast_provision_mode = static.network.802_1x.anonymous_identity = ####################################################################################### ## OpenVPN(Except T19P Model) ## ####################################################################################### static.network.vpn_enable = static.openvpn.url = ####################################################################################### ## LLDP ## ####################################################################################### static.network.lldp.enable = static.network.lldp.packet_interval = ####################################################################################### ## Span to PC ## ####################################################################################### static.network.span_to_pc_port = ####################################################################################### ## RTP Port ## ####################################################################################### static.sip.min_udp_port = static.sip.max_udp_port = static.sip.min_tcp_port = static.sip.max_tcp_port = ####################################################################################### ## Syslog ## ####################################################################################### static.syslog.enable = static.syslog.server = static.syslog.level = static.syslog.server_port = static.syslog.transport_type = static.syslog.facility = static.syslog.prepend_mac_address.enable = static.local_log.enable = static.local_log.level = static.local_log.max_file_size = ####################################################################################### ## TR069 ## ####################################################################################### static.managementserver.enable = static.managementserver.username = static.managementserver.password = static.managementserver.url = static.managementserver.connection_request_username = static.managementserver.connection_request_password = static.managementserver.periodic_inform_enable = static.managementserver.periodic_inform_interval = ####################################################################################### ## Autoprovision ## ## ####################################################################################### ### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server. ### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone, ### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC-local.cfg file on the provisioning server. ### 0-Disabled, 1-Enabled. The default value is 0. static.auto_provision.custom.sync = ### It enables or disables the phone to protect personalized configuration settings even after auto provisioning. ### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning. ### 0-Disabled, 1-Enabled. The default value is 0. static.auto_provision.custom.protect = static.auto_provision.custom.sync.path = static.auto_provision.custom.upload_method = static.auto_provision.attempt_expired_time = ##V83 Add static.auto_provision.authentication.expired_time = static.auto_provision.connect.keep_alive = static.auto_provision.inactivity_time_expire = custom.auto_provision.save_rps_info.enable = static.auto_provision.attempt_before_failed = static.auto_provision.retry_delay_after_file_transfer_failed = static.auto_provision.server.type = static.auto_provision.update_file_mode = static.auto_provision.prompt.enable = ####################################################################################### ## Autop Mode ## ####################################################################################### static.auto_provision.power_on = ####################################################################################### ## Autop PNP ## ####################################################################################### static.auto_provision.pnp_enable = ####################################################################################### ## Autop DHCP ## ####################################################################################### static.auto_provision.dhcp_option.enable = static.auto_provision.dhcp_option.list_user_options = ####################################################################################### ## Autop Repeat ## ####################################################################################### static.auto_provision.repeat.enable = static.auto_provision.repeat.minutes = ####################################################################################### ## Autop Weekly ## ####################################################################################### static.auto_provision.weekly.enable = static.auto_provision.weekly.dayofweek = static.auto_provision.weekly.begin_time = static.auto_provision.weekly.end_time = static.auto_provision.weekly_upgrade_interval = ####################################################################################### ## Autop URL ## ####################################################################################### static.auto_provision.server.url = static.auto_provision.server.username = static.auto_provision.server.password = ####################################################################################### ## Autop AES Key ## ####################################################################################### ##It configures the AES key for decrypting the Common CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. ##The default value is blank. static.auto_provision.aes_key_16.com = ##It configures the AES key for decrypting the MAC-Oriented CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. ##The default value is blank. static.auto_provision.aes_key_16.mac = static.auto_provision.aes_key_in_file = ##It configures the access URL of the custom MAC-Oriented CFG file. ##The default value is blank. static.custom_mac_cfg.url = ##It configures the value (vendor name of the device) of DHCP option 60. ##The default value is yealink. static.auto_provision.dhcp_option.option60_value = ##It configuration phone update to restart automatically.It takes effect after a reboot. ##0-Disable 1-Enable static.auto_provision.reboot_force.enable = ####################################################################################### ## Autop wildcard ## ####################################################################################### static.auto_provision.url_wildcard.pn = ####################################################################################### ## Autop Code ## ####################################################################################### ##It configures the name of the code for triggering auto provisioning. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.name = ##It configures the code for triggering auto provisioning. ##Valid characters are digits, # and *.Example:static.autoprovision.1.code = *99The default value is blank. ##It takes effect after a reboot. static.autoprovision.1.code = ##It configures the access URL of auto provisioning server.The default value is blank. ##It takes effect after a reboot. static.autoprovision.1.url = ##It configures the user name for authentication during auto provisioning. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.user = ##It configures the password for authentication during auto provisioning. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.password = ##It configures the AES key for decrypting the Common CFG file. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.com_aes = ##It configures the AES key for decrypting the MAC-Oriented CFG file. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.mac_aes = ####################################################################################### ## Watch Dog ## ####################################################################################### static.watch_dog.enable = ####################################################################################### ## SIP Advanced ## ####################################################################################### sip.use_23_as_pound = sip.rfc2543_hold = sip.use_out_bound_in_dialog = sip.reg_surge_prevention = sip.send_response_by_request = sip.notify_reboot_enable = sip.disp_incall_to_info = sip.listen_port = sip.tls_listen_port = sip.trust_ctrl = static.sip.nat_stun.enable = static.sip.nat_stun.server = static.sip.nat_stun.port = sip.timer_t1 = sip.timer_t2 = sip.timer_t4 = ##It is ASCII conversion into corresponding symbols. ##The defalult value is blank. 0-Disable 1-Enable sip.escape_characters.enable = sip.reserve_characters = ##The default value is 0 ( said according to the transmission mode configured to listen on port),1- ##1-said at the same time to monitor TCP and UDP ##2-said to monitor TCP and UDP at the same time, and from the BLF - the LIST to subscribe to the contact with a transport = TCP parameters sip.listen_mode = ##The default value is 0.(contracting out the random contact, via port to carry fixed port).It takes effect after a reboot. ##1-the out-contracting port random contact, via port to carry ##2-the out-contracting ports fixed contact, via carry fix sip.tcp_port_random_mode = sip.call_fail_use_reason.enable = sip.cid_source.preference = ##V83 Add sip.request_validation.event = sip.request_validation.digest.realm = sip.request_validation.digest.list = sip.request_validation.source.list = ####################################################################################### ## Echo Cancellation ## ####################################################################################### voice.vad = voice.cng = voice.echo_cancellation = voice.ans_nb.enable = voice.tns.enable = ####################################################################################### ## Jitter Buffer ## ####################################################################################### voice.jib.adaptive = voice.jib.min = voice.jib.max = voice.jib.normal = ####################################################################################### ## Tones ## ####################################################################################### voice.tone.country = {$yealink_voice_tone_country} voice.tone.dial = voice.tone.ring = voice.tone.busy = voice.tone.congestion = voice.tone.callwaiting = voice.tone.dialrecall = voice.tone.info = voice.tone.stutter = voice.tone.autoanswer = ####################################################################################### ## Volume ## ####################################################################################### voice.handfree_send = voice.handset_send = voice.headset_send = voice.headset.autoreset_spk_vol = voice.handset.autoreset_spk_vol = voice.handfree.autoreset_spk_vol = ####################################################################################### ## Transfer ## ####################################################################################### ##It enables or disables the transferee party¡¯s phone to prompt a missed call on the LCD screen before displaying ##the caller ID when performing a semi-attended transfer.0-Enabled,1-Disabled ##The default value is 1. transfer.semi_attend_tran_enable = ##It enables or disables the phone to complete the blind transfer through on-hook.0-Disabled,1-Enabled . ##The default value is 1. transfer.blind_tran_on_hook_enable = ##It enables or disables the phone to transfer call to the two parties after a local conference call hangs up. ##0-Disabled,1-Enabled. ##The default value is 0. transfer.tran_others_after_conf_enable = ##It enables or disables the phone to complete the attended transfer through on-hook. ##0-Disabled,1-Enabled. ##The default value is 1. transfer.on_hook_trans_enable = ##It configures the DSS key behavior during an active call when user presses the DSS ##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key. ##0-New Call,1-Attended Transfer,2-Blind Transfer. ##The default value is 2. transfer.dsskey_deal_type = ##It enables or disables the phone to enter Transfer to menu during multiple calls when pressing the transfer soft key or TRAN key. ##0-Disabled,1-Enabled. ##The default value is 1. transfer.multi_call_trans_enable = ####################################################################################### ## Language Settings ## ####################################################################################### ##It configures the language of the web user interface. lang.wui = {$yealink_language_web} ##It configures the language of the phone user interface. ##The default value is English. lang.gui = {$yealink_language_gui} gui_lang.url = gui_lang.delete = wui_lang.url = wui_lang_note.url = wui_lang.delete = ####################################################################################### ## Auto Redial ## ####################################################################################### auto_redial.enable = auto_redial.interval = auto_redial.times = ####################################################################################### ## Zero Touch ## ####################################################################################### static.zero_touch.enable = static.zero_touch.wait_time = static.features.hide_zero_touch_url.enable = static.zero_touch.network_fail_wait_times = static.zero_touch.network_fail_delay_times = ####################################################################################### ## Dial Plan ## ####################################################################################### dialplan.area_code.code = dialplan.area_code.min_len = dialplan.area_code.max_len = dialplan.area_code.line_id = ### X ranges from 1 to 10 ###dialplan.block_out.number.x = ###dialplan.block_out.line_id.x = dialplan.block_out.number.1 = dialplan.block_out.line_id.1 = ###X ranges from 1 to 100 ###dialplan.dialnow.rule.X = ###dialplan.dialnow.line_id.X = dialplan.dialnow.rule.1 = dialplan.dialnow.line_id.1 = ###X ranges from 1 to 100 ###dialplan.replace.prefix.X = ###dialplan.replace.replace.X = ###dialplan.replace.line_id.X = dialplan.replace.prefix.1 = dialplan.replace.replace.1 = dialplan.replace.line_id.1 = dialplan_dialnow.url = phone_setting.dialnow_delay = dialplan_replace_rule.url = ####################################################################################### ## Remote Phonebook(Except T20P Model) ## ####################################################################################### ###X ranges from 1 to 5 ###remote_phonebook.data.X.url = ###remote_phonebook.data.X.name = remote_phonebook.data.1.url = remote_phonebook.data.1.name = remote_phonebook.display_name = ###It enables or disables the phone to update the data of the remote phone book at a time when accessing the remote phone book. ###0-Disabled, 1-Enabled. The default value is 0. features.remote_phonebook.enter_update_enable = ##It enables or disables the phone to perform a remote phone book search when receiving an incoming call. ##0-Disabled,1-Enabled. ##The default value is 0. features.remote_phonebook.enable = ##It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server. ##The value 0 means the phone will not regularly update the data of the remote phone book from the remote phone book server. ##The default value is 21600.Integer from 3600 to 2592000,and 0. features.remote_phonebook.flash_time = ####################################################################################### ## LDAP ## ####################################################################################### ##It enables or disables LDAP feature.0-Disabled,1-Enabled. ##The default value is 0. ldap.enable = ##It configures the criteria for searching the contact name attributes. ##Example:ldap.name_filter = (|(cn=%)(sn=%)). ##The default value is blank. ldap.name_filter = ##It configures the criteria for searching the contact number attributes. ##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)) ##The default value is blank. ldap.number_filter = ##It configures the IP address or domain name of the LDAP server. ##The default value is blank. ldap.host = ##It configures the port of the LDAP server. ##The default value is 389.Integer from 1 to 65535. ldap.port = ##It configures the LDAP search base which corresponds to the location of the LDAP phonebook. ##Example:ldap.base = dc=yealink,dc=cn. ##The default value is blank. ldap.base = ##It configures the user name for accessing the LDAP server. ##The default value is blank. ldap.user = ##It configures the password for accessing the LDAP server. ##The default value is blank. ldap.password = ##It configures the maximum of the search results returned by the LDAP server to be displayed. ##The default value is 50.Integer from 1 to 32000. ldap.max_hits = ##It configures the name attributes of each record to be returned by the LDAP server. ##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn. ##The default value is blank. ldap.name_attr = ##It configures the number attributes of each record to be returned by the LDAP server. ##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone. ##The default value is blank. ldap.numb_attr = ##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with ¡°%¡± symbol. ##Example:ldap.display_name = %cn ##The default value is blank. ldap.display_name = ##It configures the LDAP version. ##The default value is 3. ldap.version = ##It enables or disables the phone to perform an LDAP search when receiving an incoming call. ##0-Disabled,1-Enabled. ##The default value is 0. ldap.call_in_lookup = ##It enables or disables the phone to sort the search results in alphabetical order or numerical order. ##0-Disabled,1-Enabled. ##The default value is 0. ldap.ldap_sort = ##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe ##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models) ldap.incoming_call_special_search.enable = ##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps ldap.tls_mode = ldap.call_out_lookup = ldap.customize_label= ####################################################################################### ## Features ## ####################################################################################### features.normal_refuse_code = features.auto_answer_delay = features.allow_mute = features.group_listen_in_talking_enable = features.call_completion_enable = features.call_num_filter = features.direct_ip_call_enable = features.relog_offtime = features.ringer_device.is_use_headset = features.factory_pwd_enable = features.anonymous_response_code = features.show_action_uri_option = features.reset_by_long_press_enable = features.upload_server = features.call_log_show_num = features.call_invite_format = phone_setting.logon_wizard_forever_wait = features.caller_name_type_on_dialing = features.off_hook_answer.enable = features.auto_linekeys.enable = features.blf_pickup_only_send_code = ##It is configured in the middle of the screen shows the current default at the bottom of the account name. ##The default is 0.CNT version 1. features.reboot_in_talk_enable = features.barge_in_via_username.enable = features.flash_url_dsskey_led.enable = static.features.default_account = features.linekey_call_with_default_account = ####################################################################################### ## Features Forward ## ####################################################################################### features.fwd_mode = features.fwd_diversion_enable = ####################################################################################### ## Features DND ## ####################################################################################### features.dnd_mode = features.dnd.enable = {if isset($yealink_feature_key_sync) && $yealink_feature_key_sync == "1"} features.dnd.off_code = features.dnd.on_code = {else} features.dnd.off_code = {$yealink_dnd_off_code} features.dnd.on_code = {$yealink_dnd_on_code} {/if} features.dnd_refuse_code = features.dnd.emergency_enable = features.dnd.emergency_authorized_number = ####################################################################################### ## Features Bluetooth ## ####################################################################################### features.bluetooth_enable = static.bluetooth.function.enable = features.bluetooth_adapter_name= voice.bluetooth_headset_send= ####################################################################################### ## Features BLF ## ####################################################################################### ##It enables or disables the phone to deal with the Version header in the BLF NOTIFY message sent by the server. ##0-Disabled,1-Enabled. ##The default value is 0.It takes effect after a reboot. features.blf_list_version = ####################################################################################### ## Features Intercom ## ####################################################################################### features.intercom.allow = features.intercom.mute = features.intercom.tone = features.intercom.barge = features.intercom.led.enable = features.intercom.subscribe.enable = features.intercom.barge_in_dialing.enable= sip.intercom_sub.enable = ####################################################################################### ## Features Hotline ## ####################################################################################### ##It configures the hotline number. ##The default value is blank. features.hotline_number = ##It configures the delay time (in seconds) for the phone to dial out the hotline number automatically. ##The default value of delay time is 4.Integer from 0 to 10 features.hotline_delay = ####################################################################################### ## Features DTMF ## ####################################################################################### features.dtmf.hide = ###Except T20P Model features.dtmf.hide_delay = features.dtmf.repetition = features.dtmf.transfer = features.dtmf.replace_tran = features.dtmf.duration = features.dtmf.volume = features.play_local_dtmf_tone_enable = ####################################################################################### ## Features Audio Settings ## ####################################################################################### features.headset_prior = features.headset_training = features.alert_info_tone = features.busy_tone_delay = features.send_pound_key = features.key_as_send = features.send_key_tone = features.key_tone = features.play_hold_tone.enable = features.play_hold_tone.delay = features.redial_tone = features.partition_tone = ####################################################################################### ## Features Action URI ## ####################################################################################### features.action_uri_limit_ip = ####################################################################################### ## Features Prefix ## ####################################################################################### features.password_dial.enable = features.password_dial.prefix = features.password_dial.length = ####################################################################################### ## Features History ## ####################################################################################### features.save_call_history = features.redial_via_local_sip_server.enable= features.local_calllog.received.replace_rule= ##V83 Add features.calllog_detailed_information = static.auto_provision.local_calllog.write_delay.terminated= static.auto_provision.local_calllog.backup.path= static.auto_provision.local_calllog.backup.enable= ####################################################################################### ## Notification Popups ## ####################################################################################### features.voice_mail_popup.enable= features.missed_call_popup.enable= features.forward_call_popup.enable= ####################################################################################### ## Ringtone ## ####################################################################################### ringtone.url = ringtone.delete = ####################################################################################### ## Phone Settings ## ####################################################################################### phone_setting.inter_digit_time = phone_setting.ring_type = phone_setting.ring_for_tranfailed = phone_setting.is_deal180 = phone_setting.show_code403 = phone_setting.ringback_timeout = phone_setting.ringing_timeout = {$yealink_ringing_timeout} phone_setting.page_tip = phone_setting.predial_autodial = phone_setting.headsetkey_mode = static.phone_setting.reserve_certs_enable = phone_setting.called_party_info_display.enable = phone_setting.call_info_display_method = {$yealink_call_info_display_method} ####################################################################################### ## Power Led Settings ## ####################################################################################### phone_setting.common_power_led_enable = phone_setting.talk_and_dial_power_led_enable = phone_setting.mail_power_led_flash_enable = phone_setting.ring_power_led_flash_enable = phone_setting.mute_power_led_flash_enable= phone_setting.hold_and_held_power_led_flash_enable = phone_setting.missed_call_power_led_flash.enable = ##It configures the level of the active backlight intensity. ##The default value is 8. phone_setting.active_backlight_level = ####################################################################################### ## Phone Setting Display ## ####################################################################################### ##It configures the backlight time (in seconds).0, 1, 15, 30, 60, 120, 300, 600 or 1800. phone_setting.backlight_time = phone_setting.backgrounds = wallpaper_upload.url = ####################################################################################### ## Phone Setting BLF ## ####################################################################################### ###It enables or disables the phone to automatically configure the BLF list keys in order. ###0-Disabled,1-Enabled. ###The default value is 1. phone_setting.auto_blf_list_enable = ####################################################################################### ## Key Lock ## ####################################################################################### ###It enables or disables keypad lock feature. ###0-Disabled,1-Enabled. ###The default value is 0. phone_setting.phone_lock.enable = ###It configures the password for unlocking the keypad. ###The default value is 123. phone_setting.phone_lock.unlock_pin = ###It configures the interval (in seconds) to automatically lock the keypad. ###The default value is 0 (the keypad is locked only by long pressing the pound key or pressing the keypad lock key) phone_setting.phone_lock.lock_time_out = phone_setting.emergency.number = ####################################################################################### ## Multicast Paging ## ####################################################################################### ##multicast.listen_address.X.label ##multicast.paging_address.X.channel ##multicast.listen_address.X.ip_address ##multicast.paging_address.X.ip_address ##multicast.paging_address.X.label ##multicast.listen_address.X.channel ##multicast.listen_address.X.volume ##Multicast(X ranges from 1 to 31.) multicast.codec = multicast.paging_address.1.channel = multicast.paging_address.1.label = multicast.paging_address.1.ip_address = multicast.receive_priority.enable = {$yealink_multicast_receive_priority_enable} multicast.receive_priority.priority = {$yealink_multicast_receive_priority_priority} multicast.receive.use_speaker = {$yealink_multicast_receive_use_speaker} multicast.receive.enhance_volume = {$yealink_multicast_receive_enhance_volume} multicast.receive.ignore_dnd.priority = {$yealink_multicast_receive_ignore_dnd_priority} multicast.listen_address.1.channel = {$yealink_multicast_listen_address_1_channel} multicast.listen_address.1.label = {$yealink_multicast_listen_address_1_label} multicast.listen_address.1.ip_address = {$yealink_multicast_listen_address_1_ip_address} multicast.listen_address.1.volume = {$yealink_multicast_listen_address_1_volume} multicast.listen_address.2.channel = {$yealink_multicast_listen_address_2_channel} multicast.listen_address.2.label = {$yealink_multicast_listen_address_2_label} multicast.listen_address.2.ip_address = {$yealink_multicast_listen_address_2_ip_address} multicast.listen_address.2.volume = {$yealink_multicast_listen_address_2_volume} multicast.listen_address.3.channel = {$yealink_multicast_listen_address_3_channel} multicast.listen_address.3.label = {$yealink_multicast_listen_address_3_label} multicast.listen_address.3.ip_address = {$yealink_multicast_listen_address_3_ip_address} multicast.listen_address.3.volume = {$yealink_multicast_listen_address_3_volume} multicast.listen_address.4.channel = {$yealink_multicast_listen_address_4_channel} multicast.listen_address.4.label = {$yealink_multicast_listen_address_4_label} multicast.listen_address.4.ip_address = {$yealink_multicast_listen_address_4_ip_address} multicast.listen_address.4.volume = {$yealink_multicast_listen_address_4_volume} multicast.listen_address.5.channel = {$yealink_multicast_listen_address_5_channel} multicast.listen_address.5.label = {$yealink_multicast_listen_address_5_label} multicast.listen_address.5.ip_address = {$yealink_multicast_listen_address_5_ip_address} multicast.listen_address.5.volume = {$yealink_multicast_listen_address_5_volume} ####################################################################################### ## Super Search ## ####################################################################################### super_search.recent_call = super_search.url = {$yealink_super_search_url} ####################################################################################### ## Security ## ####################################################################################### ###Define the login username and password of the user, var and administrator. ###If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. ###If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. ###The following examples change the user's username to "user23" and the user's password to "user23pwd". ###static.security.user_name.user = user23 ###static.security.user_password = user23:user23pwd ###The following examples change the var's username to "var55" and the var's password to "var55pwd". ###static.security.user_name.var = var55 ###static.security.user_password = var55:var55pwd static.security.user_name.user = static.security.user_name.admin = static.security.user_name.var = static.security.user_password = {if isset($admin_name)} static.security.user_name.admin = {$admin_name} static.security.user_password = {$admin_name}:{$admin_password} {/if} ###It enables or disables the phone to only accept the certificates in the Trusted Certificates list. ###0-Disabled,1-Enabled. ###The default value is 1.It takes effect after a reboot. static.security.trust_certificates = {$yealink_trust_certificates} ###It configures the source certificates for the phone to authenticate for TLS connection. ###0-Default certificates,1-Custom certificates,2-All certificates. ###The default value is 0.It takes effect after a reboot. static.security.ca_cert = ###It configures the device certificates for the phone to send for TLS authentication. ###0-Default certificates,1-Custom certificates. ###The default value is 0.It takes effect after a reboot. static.security.dev_cert = ###It enables or disables the phone to mandatorily validate the CommonName or SubjectAltName of the certificate received from the connecting server. ###0-Disabled,1-Enabled. ###The default value is 0.It takes effect after a reboot. static.security.cn_validation = ##V83 Add phone_setting.reserve_certs_config.enable = ####################################################################################### ## User Mode ## ####################################################################################### ###It enables or disables the 3-level permissions (admin, user, var). ###0-Disabled,1-Enabled. ###The default value is 0.It takes effect after a reboot. static.security.var_enable = static.web_item_level.url = ####################################################################################### ## Trusted Certificates ## ####################################################################################### static.trusted_certificates.url = static.trusted_certificates.delete = ####################################################################################### ## Server Certificates ## ####################################################################################### static.server_certificates.url = static.server_certificates.delete = ####################################################################################### ## Conference ## ####################################################################################### features.local_conf.combine_with_one_press.enable= ####################################################################################### ## Line Key ## ####################################################################################### ###T58V/VP59 X ranges from 1 to 27 #linekey.X.type--Customize the linekey type. #The valid types are: #0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial #14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser #34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button 50-Keypad Lock #55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory 84-open door 85-video monitoring #0-NA #22-XML Group #38-LDAP #46-Network Group #17-URL ###linekey.X.line = ###linekey.X.value = ###linekey.X.type = ###linekey.X.xml_phonebook = ###linekey.X.label = ###linekey.X.extension {foreach $keys['line'] as $row} #Configure Line Key {$row.device_key_id} linekey.{$row.device_key_id}.line = {$row.device_key_line} linekey.{$row.device_key_id}.value = {$row.device_key_value} {if $row.device_key_type == "1" || $row.device_key_type == "16"} linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} {else} linekey.{$row.device_key_id}.extension = {$row.device_key_extension} {/if} linekey.{$row.device_key_id}.type = {$row.device_key_type} linekey.{$row.device_key_id}.xml_phonebook = linekey.{$row.device_key_id}.label = {$row.device_key_label} {/foreach} ########################################################################################## ## Programmable Key ## ########################################################################################## #T58VT56A/VP59 X ranges from 1 to 4,12 to 14 #programablekey.x.value = #programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #programablekey.x.history_type = #programablekey.x.label--This parameter is only available to the key 1 to key 4. programablekey.X.type = programablekey.X.line = programablekey.X.value = programablekey.X.history_type = programablekey.X.label = programablekey.X.xml_phonebook = programablekey.X.extension ####################################################################################### ## Forward Always ## ####################################################################################### forward.always.enable = forward.always.target = forward.always.on_code = {$yealink_forward_always_on_code} forward.always.off_code = {$yealink_forward_always_off_code} ####################################################################################### ## Forward Busy ## ####################################################################################### forward.busy.enable = forward.busy.target = forward.busy.on_code = forward.busy.off_code = ####################################################################################### ## Forward No Answer ## ####################################################################################### forward.no_answer.enable = forward.no_answer.target = forward.no_answer.timeout = forward.no_answer.on_code = forward.no_answer.off_code = ####################################################################################### ## Forward International ## ####################################################################################### ###It enables or disables the phone to forward incoming calls to international numbers. ###0-Disabled,1-Enabled. ###The default value is 1. forward.international.enable = ####################################################################################### ## Hotdesking Startup ## ####################################################################################### phone_setting.logon_wizard = ############## hotdesking.startup_register_name_enable = hotdesking.startup_username_enable = hotdesking.startup_password_enable = hotdesking.startup_sip_server_enable = hotdesking.startup_outbound_enable = ####################################################################################### ## Hotdesking Dsskey ## ####################################################################################### hotdesking.dsskey_register_name_enable = hotdesking.dsskey_username_enable = hotdesking.dsskey_password_enable = hotdesking.dsskey_sip_server_enable = hotdesking.dsskey_outbound_enable = ####################################################################################### ## Alert Info ## ####################################################################################### ###X ranges from 1 to 100 ###distinctive_ring_tones.alert_info.x.text = ###distinctive_ring_tones.alert_info.x.ringer = ###It configures the internal ringer text for distinctive ringtone. ###Example: distinctive_ring_tones.alert_info.1.text = Family ###The default value is blank. distinctive_ring_tones.alert_info.1.text = ###It configures the desired ring tones for each text. ###The value ranges from 1 to 8, the digit stands for the appropriate ringtone. ###Ring tones 6-8 are only applicable to SIP-T46G IP phones. ###The default value is 1. distinctive_ring_tones.alert_info.1.ringer = ####################################################################################### ## Call Waiting ## ####################################################################################### call_waiting.enable = call_waiting.tone = call_waiting.on_code = call_waiting.off_code = ####################################################################################### ## Action URL ## ####################################################################################### action_url.setup_completed = action_url.registered = action_url.unregistered = action_url.register_failed = action_url.off_hook = action_url.on_hook = action_url.incoming_call = action_url.outgoing_call = action_url.call_established = action_url.dnd_on = action_url.dnd_off = action_url.always_fwd_on = action_url.always_fwd_off = action_url.busy_fwd_on = action_url.busy_fwd_off = action_url.no_answer_fwd_on = action_url.no_answer_fwd_off = action_url.transfer_call = action_url.blind_transfer_call = action_url.attended_transfer_call = action_url.hold = action_url.unhold = action_url.mute = action_url.unmute = action_url.missed_call = action_url.call_terminated = action_url.busy_to_idle = action_url.idle_to_busy = action_url.ip_change = action_url.forward_incoming_call = action_url.reject_incoming_call = action_url.answer_new_incoming_call = action_url.transfer_finished = action_url.transfer_failed = action_url.setup_autop_finish = action_url.held = action_url.unheld = ####################################################################################### ## Contact ## ####################################################################################### local_contact.data.url = local_contact.image.url = local_contact.icon.url = local_contact.data_photo_tar.url = local_contact.photo.url = static.directory_setting.url= ####################################################################################### ## Custom Factory Configuration ## ####################################################################################### static.custom_factory_configuration.url = static.features.custom_factory_config.enable = ####################################################################################### ## Custom Configuration ## ####################################################################################### static.configuration.url = ####################################################################################### ## Custom Softkey ## ####################################################################################### phone_setting.custom_softkey_enable = custom_softkey_call_failed.url = custom_softkey_call_in.url = custom_softkey_connecting.url = custom_softkey_ring_back.url = custom_softkey_talking.url = ####################################################################################### ## Configure the access URL of firmware ## ####################################################################################### ###It configures the access URL of the firmware file. ###The default value is blank.It takes effect after a reboot. static.firmware.url = ####################################################################################### ## RTCP ## ####################################################################################### phone_setting.vq_rtcpxr.interval_report.enable = phone_setting.vq_rtcpxr.session_report.enable = phone_setting.vq_rtcpxr.states_show_on_gui.enable = phone_setting.vq_rtcpxr.states_show_on_web.enable = phone_setting.vq_rtcpxr_delay_threshold_critical = phone_setting.vq_rtcpxr_delay_threshold_warning = phone_setting.vq_rtcpxr_display_jitter.enable = phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable = phone_setting.vq_rtcpxr_display_local_call_id.enable = phone_setting.vq_rtcpxr_display_local_codec.enable = phone_setting.vq_rtcpxr_display_moscq.enable = phone_setting.vq_rtcpxr_display_moslq.enable = phone_setting.vq_rtcpxr_display_packets_lost.enable = phone_setting.vq_rtcpxr_display_remote_call_id.enable = phone_setting.vq_rtcpxr_display_remote_codec.enable = phone_setting.vq_rtcpxr_display_round_trip_delay.enable = phone_setting.vq_rtcpxr_display_start_time.enable = phone_setting.vq_rtcpxr_display_stop_time.enable = phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable = phone_setting.vq_rtcpxr_interval_period = phone_setting.vq_rtcpxr_moslq_threshold_critical = phone_setting.vq_rtcpxr_moslq_threshold_warning = voice.rtcp.enable = voice.rtcp_xr.enable = voice.rtcp_cname = ####################################################################################### ## DNS ## ####################################################################################### dns_cache_a.1.name = dns_cache_a.1.ip = dns_cache_a.1.ttl = dns_cache_srv.1.name = dns_cache_srv.1.port = dns_cache_srv.1.priority = dns_cache_srv.1.target = dns_cache_srv.1.weight = dns_cache_srv.1.ttl = dns_cache_naptr.1.name = dns_cache_naptr.1.order = dns_cache_naptr.1.preference = dns_cache_naptr.1.replace = dns_cache_naptr.1.service = dns_cache_naptr.1.ttl = ####################################################################################### ## V80 Add ## ####################################################################################### ## Add Time 2015.6.26 static.network.attempt_expired_time = features.action_uri_force_autop = features.save_init_num_to_history.enable = features.action_uri.enable = features.forward.emergency.enable = features.forward.emergency.authorized_number = features.auto_answer_tone.enable = features.ip_call.auto_answer.enable = action_url.headset = action_url.handfree action_url.cancel_callout = action_url.remote_busy = action_url.call_remote_canceled = action_url.call_waiting_on = action_url.call_waiting_off = sip.terminate_notify_sub_delay_time = voice.side_tone = static.security.default_access_level = ####################################################################################### ## Network WiFi ## ####################################################################################### ##static.wifi.X.label= ##static.wifi.X.ssid= ##static.wifi.X.priority= ##static.wifi.X.security_mode= ##static.wifi.X.cipher_type= ##static.wifi.X.password= ##static.wifi.X.eap_type= ##static.wifi.X.eap_user_name= ##static.wifi.x.eap_password= ##(X ranges from 1 to 5) static.wifi.enable = static.wifi.1.label = static.wifi.1.ssid = static.wifi.1.priority = static.wifi.1.security_mode = static.wifi.1.cipher_type = static.wifi.1.password = static.wifi.1.eap_type = static.wifi.1.eap_user_name = static.wifi.1.eap_password = ##V83 Add static.wifi.function.enable = ####################################################################################### ## V80-SP2 Add ## ####################################################################################### ##Add Time 2016.5.26 features.power_saving.enable= features.power_saving.office_hour.idle_timeout = features.power_saving.off_hour.idle_timeout = features.power_saving.user_input_ext.idle_timeout= features.power_saving.office_hour.monday = features.power_saving.office_hour.tuesday = features.power_saving.office_hour.wednesday = features.power_saving.office_hour.thursday = features.power_saving.office_hour.friday = features.power_saving.office_hour.saturday = features.power_saving.office_hour.sunday = screensaver.wait_time= {$yealink_screensaver_wait} ##V83 Add features.power_saving.power_led_flash.off_time= features.power_saving.power_led_flash.on_time= screensaver.type= ####################################################################################### ## Digitmap ## ####################################################################################### dialplan.digitmap.enable= dialplan.digitmap.string= dialplan.digitmap.no_match_action= dialplan.digitmap.interdigit_short_timer= dialplan.digitmap.interdigit_long_timer= dialplan.digitmap.apply_to.press_send= dialplan.digitmap.apply_to.forward= dialplan.digitmap.apply_to.history_dial= dialplan.digitmap.apply_to.directory_dial= dialplan.digitmap.apply_to.on_hook_dial= dialplan.digitmap.active.on_hook_dialing= ##V83 Add dialplan.digitmap.apply_to.prefix_key = ####################################################################################### ## Emergency Dialplan ## ####################################################################################### dialplan.emergency.enable= dialplan.emergency.1.value= dialplan.emergency.server.1.address= dialplan.emergency.server.1.transport_type= dialplan.emergency.server.1.port= dialplan.emergency.1.server_priority= dialplan.emergency.custom_asserted_id= dialplan.emergency.asserted_id_source= ####################################################################################### ## V81 Add ## ####################################################################################### static.auto_provision.flexible.enable = static.auto_provision.flexible.interval= static.auto_provision.flexible.begin_time = static.auto_provision.flexible.end_time = voice.jib.wifi.adaptive = voice.jib.wifi.min = voice.jib.wifi.max = voice.jib.wifi.normal = wui.quick_login = ##Multicast(X ranges from 1 to 31.) multicast.receive.use_speaker = multicast.listen_address.1.channel = multicast.paging_address.1.channel = features.keep_mute.enable = voice.tone.secondary_dial = features.power_saving.intelligent_mode = features.blf_active_backlight.enable= {$yealink_blf_active_backlight} features.intercom.headset_prior.enable = ####################################################################################### ## Time&Date ## ####################################################################################### auto_dst.url = {$yealink_auto_dst_url} local_time.manual_time_enable = local_time.manual_ntp_srv_prior = local_time.time_format = {$yealink_time_format} local_time.date_format = {$yealink_date_format} local_time.dhcp_time = {$yealink_dhcp_time} local_time.summer_time = {$yealink_summer_time} local_time.dst_time_type = {$yealink_dst_type} local_time.start_time = {$yealink_time_zone_start_time} local_time.end_time = {$yealink_time_zone_end_time} local_time.offset_time = {$yealink_offset_time} local_time.interval = local_time.ntp_server1 = {$ntp_server_primary} local_time.ntp_server2 = {$ntp_server_secondary} local_time.time_zone = {$yealink_time_zone} local_time.time_zone_name = {$yealink_time_zone_name} ####################################################################################### ## Broadsoft ACD ## ####################################################################################### acd.enable= acd.auto_available_timer= ####################################################################################### ## Broadsoft Call Recording ## ####################################################################################### bw.call_recording.mode = ####################################################################################### ## Broadsoft Network Directory ## ####################################################################################### bw.calllog_and_dir = bw_phonebook.custom= bw_phonebook.enterprise_common_enable= bw_phonebook.enterprise_common_displayname= bw_phonebook.enterprise_enable= bw_phonebook.enterprise_displayname= bw_phonebook.group_common_enable= bw_phonebook.group_common_displayname= bw_phonebook.personal_enable= bw_phonebook.personal_displayname= bw_phonebook.group_enable= bw_phonebook.group_displayname = directory.update_time_interval ##V83 Add search_in_dialing.bw_directory.enable= search_in_dialing.bw_directory.priority= directory_setting.bw_directory.enable = directory_setting.bw_directory.priority = ####################################################################################### ## BSFT Setting ## ####################################################################################### bw.enable = ####################################################################################### ## Broadsoft Visual Voice Mail ## ####################################################################################### bw.voice_mail.visual.enable= voice_mail.message_key.mode= bw.voice_mail.visual.display_videomail.enable= ####################################################################################### ## Broadsoft XSI ## ####################################################################################### bw.xsi.enable= sip.authentication_for_xsi = ####################################################################################### ## Features Sync ## ####################################################################################### call_waiting.mode = features.feature_key_sync.enable = {$yealink_feature_key_sync} features.dnd.feature_key_sync.local_processing.enable = features.dnd.feature_key_sync.enable = features.forward.feature_key_sync.enable = features.forward.feature_key_sync.local_processing.enable = ####################################################################################### ## Broadsoft Call Decline ## ####################################################################################### features.call_decline.enable = ####################################################################################### ## Call Park ## ####################################################################################### features.call_park.enable= features.call_park.park_mode= features.call_park.park_code= features.call_park.park_retrieve_code= features.call_park.park_visual_notify_enable= features.call_park.park_ring= features.call_park.group_enable= features.call_park.group_park_code= sip.call_park_without_blf= ####################################################################################### ## Broadsoft UC ## ####################################################################################### bw.xmpp.enable = features.uc_password = features.uc_username = bw.xmpp.presence_icon.mode = bw.xmpp.change_presence.force_manual.enable = bw.xmpp.change_presence.enable = features.uc_dir.match_tail_number= phone_setting.dsskey_directory_auto.enable= ##V83 Add directory_setting.bw_uc_buddies.enable = directory_setting.bw_uc_buddies.priority = search_in_dialing.bw_uc_buddies.enable = search_in_dialing.bw_uc_buddies.priority = ####################################################################################### ## Features Pickup ## ####################################################################################### features.pickup.group_pickup_enable = features.pickup.group_pickup_code = features.pickup.direct_pickup_enable = features.pickup.direct_pickup_code = features.pickup.blf_visual_enable = features.pickup.blf_audio_enable = ####################################################################################### ## Encryption ## ####################################################################################### static.auto_provision.encryption.config = ####################################################################################### ## Android phone-T58V Add ## ####################################################################################### ##Add Time 2016.9.2 static.wifi.802_11e.enable = phone_setting.permit_silent_mode.enable = sip.h264.peer_resolution.default = features.doorphone.%d.display_name = features.doorphone.%d.full_screen = features.doorphone.%d.phone_number = features.doorphone.%d.send_audio = features.doorphone.%d.send_video = features.doorphone.%d.unlock_pin = features.doorphone.%d.autopreview.enable = features.doorphone.%d.httpapi.password = features.doorphone.%d.httpapi.username = features.doorphone.%d.video.stream.httpurl = features.doorphone.%d.videopreview.enable = features.doorphone.x.device_model = features.doorphone.amount = features.csta_control.enable = static.network.ethernet_as_wifi.enable = static.security.default_ssl_method = features.video_call_bandwidth = video.enable = {$yealink_video_enable} features.default_layout = ####################################################################################### ## Broadsoft Emergency Call ## ####################################################################################### ##V83 Add bw.emergency_calling.enable = ####################################################################################### ## Broadsoft Network Calllog ## ####################################################################################### ##V83 Add bw.xsi.call_log.delete.enable = bw.xsi.call_log.multiple_accounts.enable = bw.xsi.call_log.enable= ####################################################################################### ## Broadsoft Network Directory ## ####################################################################################### bw.xsi.directory.enable= bw.xsi.directory.update.enable= ####################################################################################### ## EDK ## ####################################################################################### ##EDK Soft Keys(X ranges from 1 to 10) features.enhanced_dss_keys.enable= edk.id_mode.enable= softkey.X.position= softkey.X.use.conferenced= softkey.X.use.held= softkey.X.use.hold= softkey.X.use.transfer_ring_back= softkey.X.use.ring_back= softkey.X.use.call_failed= softkey.X.use.on_talk= softkey.X.use.transfer_connecting= softkey.X.use.connecting= softkey.X.use.incoming_call= softkey.X.use.idle= softkey.X.action= softkey.X.label= softkey.X.enable= edk.edklist.X.action= edk.edklist.X.mname= edk.edklist.X.enable= edk.edkprompt.X.enable= edk.edkprompt.X.label= edk.edkprompt.X.type= edk.edkprompt.X.userfeedback= edk.edkprompt.X.title = ####################################################################################### ## Voice Mail ## ####################################################################################### features.voice_mail_alert.enable= features.voice_mail_tone_enable= features.hide_feature_access_codes.enable= ####################################################################################### ## XML ## ####################################################################################### push_xml.server= push_xml.sip_notify= push_xml.block_in_calling= features.xml_browser.loading_tip.delay = ####################################################################################### ## Features USB ## ####################################################################################### ##V83 Add static.usb.power.enable = static.usbdisk.function.enable = ####################################################################################### ## Acoustic Shield ## ####################################################################################### ##V83 Add features.acoustic_shield.level= features.acoustic_shield.mode= ####################################################################################### ## Camera ## ####################################################################################### camera.flicker = camera.status_bar_icon.enable= ##V83 Add static.camera.function.enable= ####################################################################################### ## Contact Other ## ####################################################################################### ##V83 Add phone_setting.search.highlight_keywords.enable = ####################################################################################### ## dsskey icon ## ####################################################################################### ##V83 Add dsskey.icon.url= dsskey.icon.delete= programablekey.1.icon= programablekey.2.icon= programablekey.3.icon= programablekey.4.icon= ####################################################################################### ## Call Recording ## ####################################################################################### features.usb_call_recording.enable= ####################################################################################### ## Log Backup ## ####################################################################################### static.auto_provision.local_log.backup.enable = static.auto_provision.local_log.backup.path = static.auto_provision.local_log.backup.upload_period = static.auto_provision.local_log.backup.append = static.auto_provision.local_log.backup.bootlog.upload_wait_time= static.auto_provision.local_log.backup.append.max_file_size = static.auto_provision.local_log.backup.append.limit_mode= ####################################################################################### ## Secure Domain List ## ####################################################################################### wui.secure_domain_list = ##V83 Add features.full_screen_in_call_enable= features.status_bar.hide= features.system_funtion_bar.hide= phone_setting.warnings_display.mode= phone_setting.browser.url= features.hide_world_clock.enable = ####################################################################################### ## Dect ## ####################################################################################### ##V83 Add base.pin_code= static.base.repeater_mode.enable= base.pin_code_for_register= base.double_pin_code.enable= custom.handset.auto_answer.enable= custom.handset.auto_intercom= custom.handset.backlight_in_charger.enable= custom.handset.backlight_out_of_charger.enable= custom.handset.confirmation_tone.enable= custom.handset.date_format= custom.handset.eco_mode.enable=- custom.handset.keypad_light.enable= custom.handset.keypad_tone.enable= custom.handset.language= custom.handset.low_battery_tone.enable= custom.handset.missed_call_notify_light.enable= custom.handset.screen_saver.enable= custom.handset.time_format= custom.handset.voice_mail_notify_light.enable= custom.handset.wallpaper= handset.X.dial_out_default_line= handset.X.dial_out_lines= handset.X.hac.enable= handset.X.incoming_lines= handset.X.name= handset.X.contact_list.url= ## X rang from 1 to 5 over_the_air.base_trigger= over_the_air.handset_tip= over_the_air.handset_trigger= over_the_air.url= over_the_air.url.w52h= over_the_air.url.w56h= over_the_air.url.w53h= static.auto_provision.custom.handset.protect= static.auto_provision.handset_configured.enable= phone_setting.end_call_on_hook.enable= static.directory_setting.shared_contact.enable= shared_contact_list.url= features.ms.x.mode = features.ms.x.slave_handset_number = ####################################################################################### ## Metaswitch Setting ## ####################################################################################### meta.enable = meta.login_mode = meta.comm_portal.server.token = meta.comm_portal.server.username = meta.comm_portal.server.password = meta.comm_portal.server.url = meta.comm_portal.enable = meta.comm_portal.contacts.update_interval = meta.comm_portal.replace_local_call_list.enable= meta.comm_portal.contacts.group.mlhgs.label= meta.comm_portal.contacts.group.extensions.label= meta.comm_portal.contacts.group.contacts.label= meta.comm_portal.contacts.group.mlhgs.enable= meta.comm_portal.contacts.group.extensions.enable= meta.comm_portal.contacts.group.contacts.enable= meta.comm_portal.call_list.enable= meta.comm_portal.contacts.enable= meta.comm_portal.message.enable= meta.comm_portal.logout.enable = meta.comm_portal.keep_alive_interval_time = directory_setting.meta_directory.enable= directory_setting.meta_directory.priority= directory_setting.meta_call_log.enable= directory_setting.meta_call_log.priority= search_in_dialing.meta_call_log.priority = search_in_dialing.meta_call_log.enable = search_in_dialing.meta_directory.priority = search_in_dialing.meta_directory.enable = ####################################################################################### ## Contact Backup ## ####################################################################################### static.auto_provision.local_contact.backup.path = static.auto_provision.local_contact.backup.enable = ####################################################################################### ## APP ## ####################################################################################### app.install_url = app.uninstall = pm.version = standard app.unavailable = {foreach $yealink_app_unavailable as $value}{$value}/{/foreach} app.autorun = custom.static.system_mode = custom.static.system_mode_selection = custom.static.system_mode_enable = features.action_call_answer = features.action_contact = features.action_dialer = features.action_dsskey = features.action_history =