#!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted.## ####################################################################################### ## Network ## ####################################################################################### #Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; #Require reboot; network.internet_port.type = #Configure the static IP address, subnet mask, gateway and DNS server. #Require Reboot; network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = network.primary_dns= network.secondary_dns = #Configure the username and password for PPPOE connection. #Require reboot; network.pppoe.user = network.pppoe.password = #Configure the PC port type; 0-Router, 1-Bridge (default); #Require reboot; network.bridge_mode = #Configure the IP address and mask when the PC port is configured as Router. #Require reboot; network.pc_port.ip = network.pc_port.mask = #Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default); #Require reboot; network.pc_port.dhcp_server = #Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100. network.dhcp.start_ip = network.dhcp.end_ip = #Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled; #Require reboot; network.vlan.internet_port_enable = #Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. #Require reboot; network.vlan.internet_port_vid = #Configure the VLAN priority, it ranges from 0 (default) to 7. #Require reboot; network.vlan.internet_port_priority = #Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; #Require reboot; network.vlan.pc_port_enable = #Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. #Require reboot; network.vlan.pc_port_vid = #Configure the VLAN priority, it ranges from 0 (default) to 7. #Require reboot; network.vlan.pc_port_priority = #Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only; #Require reboot; network.web_server_type = #Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. #Require reboot; network.port.http = network.port.https = #Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. #Require reboot; network.port.max_rtpport = #Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. #Require reboot; network.port.min_rtpport = #Configure the voice QOS. It ranges from 0 to 63, the default value is 46. #Require reboot; network.qos.rtptos = #Configure the SIP QOS. It ranges from 0 to 63, the default value is 46. #Require reboot; network.qos.signaltos = #Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2; #Require reboot; network.802_1x.mode = #Configure the username and password for 802.1x authentication. #Require reboot; network.802_1x.identity = network.802_1x.md5_password = #Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; #Require reboot; network.vpn_enable = #Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); #Require reboot; network.lldp.enable = #Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 120. #Require reboot; network.lldp.packet_interval = #Enable or disable the phone to obtain DNS from DHCP; 0-Disabled, 1-Enabled (default); #Require reboot; network.static_dns_enable = ####################################################################################### ## Syslog Server ## ####################################################################################### #Configure the IP address of the syslog server. #Require reboot; syslog.server = #Configure the syslog level. It ranges from 0 to 6, the default value is 3. #Require reboot; syslog.log_level = ####################################################################################### ## TR069 ## ####################################################################################### #The TR069 feature is only applicable to some designated firmware versions. #All settings of TR069 require reboot. #Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; managementserver.enable = #Configure the username and password for the phone to authenticate with the ACS. managementserver.username = managementserver.password = #Configure the access URL of the ACS. managementserver.url = #Configure the username and password for the phone to authenticate the connection requests. managementserver.connection_request_username = managementserver.connection_request_password = #Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; managementserver.periodic_inform_enable = #Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. managementserver.periodic_inform_interval = ####################################################################################### ## Auto Provisioning ## ####################################################################################### #Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); auto_provision.pnp_enable = #Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); auto_provision.mode = #Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; auto_provision.repeat.enable = #Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. auto_provision.repeat.minutes = #Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; auto_provision.weekly.enable = #Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly; #auto_provision.weekly.mask = 0123456 #auto_provision.weekly.begin_time = 00:00 #auto_provision.weekly.end_time = 00:00 auto_provision.weekly.mask = auto_provision.weekly.begin_time = auto_provision.weekly.end_time = #Configure the URL of the auto provisioning server. auto_provision.server.url = {$yealink_provision_url} #Configure the domain name of the PNP server. auto_provision.pnp_domain_name = #Configure the PNP vendor information. auto_provision.pnp_event_vendor = #Configure the name of the Common configuration file. auto_provision.common_file_name = #Configure the username and password for downloading. auto_provision.server.username = {$http_auth_username} auto_provision.server.password = {$http_auth_password} #Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); auto_provision.dhcp_option.enable = #Configure the value (manufacturer of the device) of DHCP option 60. auto_provision.dhcp_option.option60_value = #Configure the custom DHCP option number. It ranges from 128 to 254. auto_provision.dhcp_option.list_user_options = #Configure AES key (16 characters) for decrypting the common CFG file. auto_provision.aes_key_16.com = #Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. auto_provision.aes_key_16.mac = ####################################################################################### ## Auto Provisioning Code ## ####################################################################################### #This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. #Require reboot; #"X" ranges from 1 to 50 #Configure the auto provisioning name. #The valid value is a string, the maximum length is 100. #autoprovision.x.name = #Configure the auto provisioning code. #The valid value is a string, the maximum length is 100. #autoprovision.x.code = #Configure the URL of the auto provisioning server. #The valid value is a string, the maximum length is 256. #autoprovision.x.url = #Configure the username and password for downloading. #The valid value is a string, the maximum length is 100. #autoprovision.x.user = #autoprovision.x.password = #Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. #autoprovision.x.com_aes = #autoprovision.x.mac_aes = autoprovision.1.name = autoprovision.1.code = autoprovision.1.url = autoprovision.1.user = autoprovision.1.password = autoprovision.1.com_aes = autoprovision.1.mac_aes = autoprovision.2.name = autoprovision.2.code = autoprovision.2.url = autoprovision.2.user = autoprovision.2.password = autoprovision.2.com_aes = autoprovision.2.mac_aes = ####################################################################################### ## Phone Features ## ####################################################################################### #Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); sip.use_23_as_pound = #Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; sip.rfc2543_hold = #Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); sip.use_out_bound_in_dialog = #Configure the registration random time (in seconds). It ranges from 0 (default) to 60. sip.reg_surge_prevention = sip.check_autop_result_before_register = sip.send_response_by_request = #Enable or disable the phone to reboot when receiving SIP notify messages; 0-Disabled, 1-Enabled (default); sip.notify_reboot_enable = #Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); watch_dog.enable = #Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled; redirect.enable = #Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; #0-Disabled, 1-Enabled (default); transfer.semi_attend_tran_enable = #Enable or disable the phone to complete the blind or attended transfer through on-hook; #0-Disabled,1-Enabled(default); transfer.blind_tran_on_hook_enable = transfer.on_hook_trans_enable = #Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); transfer.dsskey_deal_type = #Enable or disable the conference initiator to transfer the call when hanging up; #0-Disabled(default),1-Enabled; transfer.tran_others_after_conf_enable = ####################################################################################### ## Voice ## ####################################################################################### #Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; voice.vad = #Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); voice.cng = #Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); voice.echo_cancellation = #Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. voice.side_tone= #Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29. #Require reboot; voice.handfree_send = voice.handset_send = voice.headset_send = #Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); voice.jib.adaptive = #Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. voice.jib.min = voice.jib.max = voice.jib.normal = #Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. #voice.tone.country = Custom voice.tone.country = #Customize the tone when the "voice.tone.country" is configured as Custom. #The value format: Frequency/Duration. #Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones. #A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4). #Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms. #At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by comma. #For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800 voice.tone.dial = voice.tone.ring = voice.tone.busy = voice.tone.congestion = voice.tone.callwaiting = voice.tone.dialrecall = voice.tone.record= voice.tone.info = voice.tone.stutter = voice.tone.message = voice.tone.autoanswer = #Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. voice.handfree.spk_vol = voice.handset.spk_vol = voice.headset.spk_vol = #Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. voice.handfree.tone_vol = voice.handset.tone_vol = voice.headset.tone_vol = #Configure the ring volume. It ranges from 0 to 15, the default value is 8. voice.ring_vol= #Configure the Speaker volume when in the group listening mode. It ranges from 0 to 15, the default value is 8. voice.group_spk_vol = ####################################################################################### ## Security Settings ## ####################################################################################### #Enable or disable the phone to only accept the certificates in the Trusted Certificates list; #0-Disabled, 1-Enabled (default); security.trust_certificates = #Define the login username and password of the user, var and administrator. #If your username is defined as: security.user_name.admin = adminuser. #and your password must like this: security.user_password = adminuser:adminpassword. #adminuser is the value of "security.user_name.admin"; adminpassword is the password you want to set. {if isset($user_name) } security.user_name.user = {$user_name} security.user_password = {$user_name}:{$user_password} {/if} {if isset($admin_name) } security.user_name.admin = {$admin_name} security.user_password = {$admin_name}:{$admin_password} {/if} {if isset($var_name) } security.user_name.var = {$var_name} security.user_password = {$var_name}:{$var_password} {/if} #Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; #Require reboot; security.var_enable = ####################################################################################### ## Customize the softkey ## ####################################################################################### #Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. custom_softkey_call_failed.url = custom_softkey_call_in.url = custom_softkey_connecting.url = custom_softkey_dialing.url = custom_softkey_ring_back.url = custom_softkey_talking.url = ####################################################################################### ## Memory Key (For T38G only) ## ####################################################################################### #X ranges from 1 to 10; #memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. #The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. #But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. #memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. #memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. #memorykey.x.type--Assign the desired feature to the memory key. #Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS # 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL # 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser # 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group #memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #memorykey.x.sub_type = # Configure Memory Key1 memorykey.1.line = memorykey.1.value = memorykey.1.pickup_value = memorykey.1.type = memorykey.1.xml_phonebook = memorykey.1.sub_type = # Configure Memory Key2 memorykey.2.line = memorykey.2.value = memorykey.2.pickup_value = memorykey.2.type = memorykey.2.xml_phonebook = memorykey.2.sub_type = # Configure Memory Key3 memorykey.3.line = memorykey.3.value = memorykey.3.pickup_value = memorykey.3.type = memorykey.3.xml_phonebook = memorykey.3.sub_type = # Configure DSS Key4 memorykey.4.line = memorykey.4.value = memorykey.4.pickup_value = memorykey.4.type = memorykey.4.xml_phonebook = memorykey.4.sub_type = # Configure Memory Key5 memorykey.5.line = memorykey.5.value = memorykey.5.pickup_value = memorykey.5.type = memorykey.5.xml_phonebook = memorykey.5.sub_type = # Configure Memory Key6 memorykey.6.line = memorykey.6.value = memorykey.6.pickup_value = memorykey.6.type = memorykey.6.xml_phonebook = memorykey.6.sub_type = # Configure Memory Key7 memorykey.7.line = memorykey.7.value = memorykey.7.pickup_value = memorykey.7.type = memorykey.7.xml_phonebook = memorykey.7.sub_type = # Configure Memory Key8 memorykey.8.line = memorykey.8.value = memorykey.8.pickup_value = memorykey.8.type = memorykey.8.xml_phonebook = memorykey.8.sub_type = # Configure Memory Key9 memorykey.9.line = memorykey.9.value = memorykey.9.pickup_value = memorykey.9.type = memorykey.9.xml_phonebook = memorykey.9.sub_type = # Configure Memory Key10 memorykey.10.line = memorykey.10.value = memorykey.10.pickup_value = memorykey.10.type = memorykey.10.xml_phonebook = memorykey.10.sub_type = ####################################################################################### ## Line Key ## ####################################################################################### #The x of the parameter "linekey.x.line" ranges from 1 to 6. #The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. #linekey.x.lable--Define the label for each line key. #Configure Line Key1 linekey.1.line = linekey.1.value = linekey.1.pickup_value = linekey.1.type = linekey.1.xml_phonebook = linekey.1.label = #Configure Line Key2 linekey.2.line = linekey.2.value = linekey.2.pickup_value = linekey.2.type = linekey.2.xml_phonebook = linekey.2.label = #Configure Line Key3 linekey.3.line = linekey.3.value = linekey.3.pickup_value = linekey.3.type = linekey.3.xml_phonebook = linekey.3.label = #Configure Line Key4 (for T38G only) linekey.4.line = linekey.4.value = linekey.4.pickup_value = linekey.4.type = linekey.4.xml_phonebook = linekey.4.label = #Configure Line Key5 (for T38G only) linekey.5.line = linekey.5.value = linekey.5.pickup_value = linekey.5.type = linekey.5.xml_phonebook = linekey.5.label = #Configure Line Key6 (for T38G only) linekey.6.line = linekey.6.value = linekey.6.pickup_value = linekey.6.type = linekey.6.xml_phonebook = linekey.6.label = ########################################################################################## ## Programmable Key (For T38G only) ## ########################################################################################## #X ranges from 1 to 15. #programablekey.x.type--Customize the programmable key type. #The valid types are: #0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom #22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook #44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock #programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. #The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. #But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. #programablekey.x.value = #programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #programablekey.x.history_type = #programablekey.x.label--This parameter is only available to the key 1 to key 4. programablekey.1.type = programablekey.1.line = programablekey.1.value = programablekey.1.xml_phonebook = programablekey.1.history_type = programablekey.1.label = ########################################################################################## ## Expansion Key £¨For T38G only£© ## ########################################################################################## #X ranges from 1 to 6, Y ranges from 1 to 39. #expansion_module.x.key.y.type = 37 (Switch by default) #expansion_module.x.key.y.line = 0 #expansion_module.x.key.y.value = #expansion_module.x.key.y.pickup_value = #expansion_module.x.key.y.label = #Each expansion module1 key1 expansion_module.1.key.1.type = expansion_module.1.key.1.line = expansion_module.1.key.1.value = expansion_module.1.key.1.pickup_value = expansion_module.1.key.1.label = #Each expansion module1 key2 expansion_module.1.key.2.type = expansion_module.1.key.2.line = expansion_module.1.key.2.value = expansion_module.1.key.2.pickup_value = expansion_module.1.key.2.label = #Each expansion module2 key1 expansion_module.2.key.1.type = expansion_module.2.key.1.line = expansion_module.2.key.1.value = expansion_module.2.key.1.pickup_value = expansion_module.2.key.1.label = ####################################################################################### ## Automatic Call Distribute ## ####################################################################################### #Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; acd.auto_available = #Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. acd.auto_available_timer = ####################################################################################### # Action URL Settings ## ####################################################################################### #action_url.setup_completed--Inform the server that the phone has completed the startup. #action_url.dnd_on-- Inform the server that the DND is activated on the phone. #The value format is: http://IP address of server/help.xml?variable name=variable value. #The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. #$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. #$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. #$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. #$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. #$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. #$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. #$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. #$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. #For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac action_url.setup_completed = action_url.log_on = action_url.log_off = action_url.register_failed = action_url.off_hook = action_url.on_hook = action_url.incoming_call = action_url.outgoing_call = action_url.call_established = action_url.dnd_on = action_url.dnd_off = action_url.always_fwd_on = action_url.always_fwd_off = action_url.busy_fwd_on = action_url.busy_fwd_off = action_url.no_answer_fwd_on = action_url.no_answer_fwd_off = action_url.transfer_call = action_url.blind_transfer_call = action_url.attended_transfer_call = action_url.hold = action_url.unhold = action_url.mute = action_url.unmute = action_url.missed_call = action_url.call_terminated = action_url.busy_to_idle = action_url.idle_to_busy = action_url.forward_incoming_call = action_url.reject_incoming_call = action_url.answer_new_incoming_call = action_url.transfer_finished = action_url.transfer_failed = ####################################################################################### ## Language Settings ## ####################################################################################### #Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. lang.wui = #Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. #lang.gui = English lang.gui = ####################################################################################### ## Time Settings ## ####################################################################################### #Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. #The default time zone name is China(Beijing). #local_time.time_zone = +8 #local_time.time_zone_name = China(Beijing) local_time.time_zone = {$yealink_time_zone} local_time.time_zone_name = {$yealink_time_zone_name} #Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. local_time.ntp_server1 = {$ntp_server_primary} local_time.ntp_server2 = {$ntp_server_secondary} #Configure the update interval (in seconds) when using the NTP server. The default value is 1000. local_time.interval = #Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); local_time.summer_time = #Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; local_time.dst_time_type = #Configure the start time of DST. The default value is 1/1/0. #If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. #If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. #For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. local_time.start_time = {$yealink_time_zone_start_time} #Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. local_time.end_time = {$yealink_time_zone_end_time} #Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. local_time.offset_time = {$yealink_offset_time} #Configure the time format; 0-12 Hour, 1-24 Hour (default); local_time.time_format = {$yealink_time_format} #Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; local_time.date_format = {$yealink_date_format} #Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; local_time.dhcp_time = {$yealink_dhcp_time} #Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. local_time.manual_time_enable = ####################################################################################### ## Hot Desking ## ####################################################################################### #Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; #hotdesking.startup_register_name_enable = 0 (default) #hotdesking.startup_username_enable = 1 (default) #hotdesking.startup_password_enable = 1 (default) #hotdesking.startup_sip_server_enable = 1 (default) #hotdesking.startup_outbound_enable = 0 (default) hotdesking.startup_register_name_enable = hotdesking.startup_username_enable = hotdesking.startup_password_enable = hotdesking.startup_sip_server_enable = hotdesking.startup_outbound_enable = #Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; #0-Disabled, 1-Enabled; #hotdesking.dsskey_register_name_enable = 0 (default) #hotdesking.dsskey_username_enable = 1 (default) #hotdesking.dsskey_password_enable = 1 (default) #hotdesking.dsskey_sip_server_enable = 1 (default) #hotdesking.dsskey_outbound_enable = 0 (default) hotdesking.dsskey_register_name_enable = hotdesking.dsskey_username_enable = hotdesking.dsskey_password_enable = hotdesking.dsskey_sip_server_enable = hotdesking.dsskey_outbound_enable = ####################################################################################### ## Distinctive Ring Tones ## ####################################################################################### #"X" ranges from 1 to 10; #Configure the text to map the keywords contained in the "Alert-info" header. #distinctive_ring_tones.alert_info.X.text = family distinctive_ring_tones.alert_info.1.text = #Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. #distinctive_ring_tones.alert_info.X.ringer = 1 distinctive_ring_tones.alert_info.1.ringer = ####################################################################################### ## Auto Redial ## ####################################################################################### #Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; auto_redial.enable = #Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. auto_redial.interval = #Configure the times of auto redialing . It ranges from 1 to 300. The default value is 10. auto_redial.times = ####################################################################################### ## Zero Touch ## ####################################################################################### #Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; zero_touch.enable = #Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. zero_touch.wait_time = ####################################################################################### ## Push XML ## ####################################################################################### push_xml.server = #Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; push_xml.block_in_calling = #Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; push_xml.sip_notify = ####################################################################################### ## Dial Plan ## ####################################################################################### #Configure the area code. dialplan.area_code.code = dialplan.area_code.min_len = 1 dialplan.area_code.max_len = 15 #When applying the rule to multiple lines, each line ID separated by comma. #e.g. dialplan.area_code.line_id = 1, 2, 3 dialplan.area_code.line_id = #Configure the block out number. X ranges from 1 to 10. #dialplan.block_out.number.x = dialplan.block_out.number.1 = #When applying the rule to multiple lines, each line ID separated by comma. E.g. 1,2,3. #dialplan.block_out.line_id.x = dialplan.block_out.line_id.1 = #Configure the dialnow rule. X ranges from 1 to 20. #dialplan.dialnow.rule.x = #dialplan.dialnow.line_id.x = dialplan.dialnow.rule.1 = dialplan.dialnow.line_id.1 = #Configure the replace rule. X ranges from 1 to 20. #dialplan.replace.prefix.x = #dialplan.replace.replace.x = #dialplan.replace.line_id.x = dialplan.replace.prefix.1 = dialplan.replace.replace.1 = dialplan.replace.line_id.1 = ####################################################################################### ## BSFT Phonebook ## ####################################################################################### #Configuration of BW phonebook. X ranges from 1 to 6. #bw_phonebook.data.x.server = #bw_phonebook.data.x.port = #bw_phonebook.data.x.username = #bw_phonebook.data.x.password = #bw_phonebook.data.x.name = bw_phonebook.data.1.server = bw_phonebook.data.1.port = bw_phonebook.data.1.username = bw_phonebook.data.1.password = bw_phonebook.data.1.name = ####################################################################################### ## BSFT Call Log ## ####################################################################################### #Configuration of the BW call log. X ranges from 1 to 3. #bw_call_log.data.x.server = #bw_call_log.data.x.port = #bw_call_log.data.x.username = #bw_call_log.data.x.password = #bw_call_log.data.x.name = bw_call_log.data.1.server = bw_call_log.data.1.port = bw_call_log.data.1.username = bw_call_log.data.1.password = bw_call_log.data.1.name = #Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; #0-Disabled (default), 1-Enabled; #Require reboot; bw.calllog_and_dir = #Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default); #Require reboot; bw.behave_calllog = #Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default); #Require reboot; bw.behave_bw_dir = #Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; bw.feature_key_sync = ####################################################################################### ## Remote phonebook ## ####################################################################################### #Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. #remote_phonebook.data.x.url = #remote_phonebook.data.x.name = {if isset($yealink_remote_phonebook_1_name) } remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name} {else} remote_phonebook.data.1.name = Users {/if} {if isset($yealink_remote_phonebook_1_url) } remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url} {else} remote_phonebook.data.1.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=users {/if} {if isset($yealink_remote_phonebook_2_name) } remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name} {else} remote_phonebook.data.2.name = Groups {/if} {if isset($yealink_remote_phonebook_2_url) } remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url} {else} remote_phonebook.data.2.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=groups {/if} {if isset($yealink_remote_phonebook_3_name) } remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name} {else} remote_phonebook.data.3.name = Extensions {/if} {if isset($yealink_remote_phonebook_3_url) } remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url} {else} remote_phonebook.data.3.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=extensions {/if} remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name} remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url} remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name} remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url} ####################################################################################### ## LDAP Settings ## ####################################################################################### ldap.enable = {$ldap_enable} #Configure the search criteria for name and number lookups. ldap.name_filter = {$ldap_name_filter} ldap.number_filter = {$ldap_number_filter} ldap.host = {$ldap_host} ldap.port = {$ldap_port} ldap.base = {$ldap_base} ldap.user = {$ldap_user} ldap.password = {$ldap_password} #Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. ldap.max_hits = {$ldap_max_hits} ldap.name_attr = {$ldap_name_attr} ldap.numb_attr = {$ldap_numb_attr} ldap.display_name = {$ldap_display_name} #Configure the LDAP version. The valid value is 2 or 3 (default). ldap.version = {$ldap_version} #Conifugre the search delay time. It ranges from 0 to 2000 (default). ldap.search_delay = #Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; ldap.call_in_lookup = {$ldap_call_in_lookup} #Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; ldap.ldap_sort = {$ldap_sort} #Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; ldap.dial_lookup = {$ldap_dial_lookup} ####################################################################################### ## Phone Features ## ####################################################################################### #Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; #features.dnd_refuse_code = 480 features.dnd_refuse_code = #Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). features.normal_refuse_code = #Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; features.call_completion_enable = features.dnd.on_code = features.dnd.off_code = #Enable or disable the phone to receive the emergency call when in the DND mode; 0-Disabled, 1-Enabled (default); features.dnd.emergency_enable = #Specify the emergency number, multiple numbers (at most three) are separated by comma. features.dnd.emergency_authorized_number = #Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); call_waiting.enable = #Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); call_waiting.tone = #Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); features.intercom.allow = #Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; features.intercom.mute = #Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); features.intercom.tone = #Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); features.intercom.barge = #Specify whether to display the contact name in the remote phonebook; 0-Disabled (default), 1-Enabled; features.remote_phonebook.enable = #Set the interval (in seconds) the phone updates the remote phonebook. The default value is 3600. features.remote_phonebook.flash_time = #Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 2. features.hotline_number = features.hotline_delay = #Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). features.dtmf.repetition = #Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. features.busy_tone_delay = #Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; features.pound_key.mode = #Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); features.send_key_tone = features.key_tone = features.redial_tone = #Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); features.save_call_history = #Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; #Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); features.action_uri_limit_ip = #Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); features.dsskey_blind_tran = #Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. features.relog_offtime = #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); #Require reboot; features.direct_ip_call_enable = 0 #Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; features.ringer_device.is_use_headset = #Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; features.pickup.group_pickup_enable = #Configure the group pickup code. features.pickup.group_pickup_code = #Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; features.pickup.direct_pickup_enable = #Configure the directed pickup code. features.pickup.direct_pickup_code = #Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; #0-Disabled (default), 1-Enabled; features.pickup.blf_visual_enable = features.pickup.blf_audio_enable = #Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle. #0-Disabled (default), 1-Enabled; features.blf_and_callpark_idle_led_enable = #Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled; #features.factory_pwd_enable = 1 #Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = #Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1. phone_setting.flash_hook_timer = #Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer; phone_setting.lock = #Set the unlock password and expiry time (in seconds) of phone lock. It ranges from 0 to 3600, the default value of expiry time is 10. phone_setting.phone_lock.unlock_pin = phone_setting.phone_lock.lock_time_out = #Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wav¡­¡­Ring8.wav. #You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav phone_setting.ring_type = #Configure the active backlight level. It ranges from 1 to 10, the default value is 2. #The same level for different phones may result in different backlight intensities. #The backlight level of T2xP ranges from 1 to 3. phone_setting.active_backlight_level = #Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. phone_setting.inactive_backlight_level = #Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800. phone_setting.backlight_time = #Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800. phone_setting.screen_saver_time = #Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. #phone_setting.ring_for_tranfailed = Ring1.wav phone_setting.ring_for_tranfailed = #Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; phone_setting.logon_wizard = #Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; phone_setting.predial_autodial = 1 #Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); phone_setting.is_deal180 = #Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. phone_setting.dialnow_delay = #Enable or disable the user to customize the softkey layout; 0-Disabled (default), 1-Enabled; phone_setting.custom_softkey_enable = #Configure the phone theme; 0-Theme1 (default), 1-Theme2, 2-Theme3, 3-Theme4; phone_setting.theme = #Configure the emergency number, each separated by comma. The default value is 112,911,110. phone_setting.emergency.number = #Enable or disable the phone to display the short message automatically; 0-Disabled, 1-Enabled (default); phone_setting.sms_popup_enable = #Enable or disable the phone to turn off the power LED when it is idle; 0-Disabled (default), 1-Enabled; phone_setting.common_power_led_enable = #Enable or disable the phone to flash the power LED when receiving new voice mail or message; 0-Disabled (default), 1-Enabled; phone_setting.mail_power_led_flash_enable = #Enable or disable the phone to flash the power LED when muting a call; 0-Disabled (default), 1-Enabled; phone_setting.mute_power_led_flash_enable = #Enable or disable the phone to flash the power LED when placing a calll on hold; 0-Disabled (default), 1-Enabled; phone_setting.hold_power_led_flash_enable = ####################################################################################### ## Configure the access URL of firmware ## ####################################################################################### firmware.url = ####################################################################################### ## Configure the access URL of the customized ringtones ## ####################################################################################### ringtone.url = #ringtone.delete = http://localhost/all,delete all the customized ring tones. ringtone.delete = ####################################################################################### ## Configure the access URL of language file ## ####################################################################################### gui_lang.url = #gui_lang.delete =http://localhost/all, delete all the customized languages. gui_lang.delete = ####################################################################################### ## Certificates ## ####################################################################################### trusted_certificates.url = #trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. trusted_certificates.delete = server_certificates.url = #server_certificates.delete = http://localhost/all, delete the server certificate. server_certificates.delete = ####################################################################################### ## Local Contact/DST Time/Dialnow Rule/Replace Rule ## ####################################################################################### local_contact.data.url = auto_dst.url = dialplan_dialnow.url = dialplan_replace_rule.url = ####################################################################################### ## Customized Factory Configurations ## ####################################################################################### #Configure the access URL for downloading the customized factory configurations. custom_factory_configuration.url = ####################################################################################### ## Call List ## ####################################################################################### #Configure the access URL for downloading the call list. #Require reboot call_list.url = ####################################################################################### ## OpenVPN ## ####################################################################################### #Configure the access URL for downloading the open VPN tar. openvpn.url = ####################################################################################### ## Super Search URL ## ####################################################################################### super_search.url = ####################################################################################### ## Directory Setting ## ####################################################################################### #Configure the access URL of the directory setting file. directory_setting.url = {$yealink_directory_setting_url} ####################################################################################### ## Configure the access URL of the Wallpaper ## ####################################################################################### wallpaper_upload.url = {$yealink_t28p_wallpaper} #Configure the phone background. #If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png #If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png phone_setting.backgrounds = Config:yealink_t28p_wallpaper.png ####################################################################################### ## Configure the access URL of the Screensaver ## ####################################################################################### #Configure the access URL for downloading the customized wallpaper. screen_saver.pic.url = {$yealink_t28p_screen_saver} ####################################################################################### ## Configuration files for Var ## ####################################################################################### #Configure the access URL for downloading the files for var. #Require reboot web_item_level.url =