#!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted.## ####################################################################################### ## Network ## ####################################################################################### #Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; #Require reboot; network.internet_port.type = #Configure the static IP address, submask, gateway and DNS server. #Require reboot; network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = network.primary_dns = network.secondary_dns = #Configure the username and password for PPPOE connection. #Require reboot; network.pppoe.user = network.pppoe.password = #Enable or disable the VLAN of WAN port; 0-Disabled(default), 1-Enabled; #Require reboot; network.vlan.internet_port_enable = #Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1. #Require reboot; network.vlan.internet_port_vid = #Configure the VLAN priority, it ranges from 0 (default) to 7. #Require reboot; network.vlan.internet_port_priority = #Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. #Require reboot; network.port.http = network.port.https = #Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. #Require reboot; network.port.max_rtpport = #Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. #Require reboot; network.port.min_rtpport = #Configure the voice QOS. It ranges from 0 to 63, the default value is 40. #Require reboot; network.qos.rtptos = #Configure the SIP QOS. It ranges from 0 to 63, the default value is 26. #Require reboot; network.qos.signaltos = #Configure the 802.1x mode; 0-Disabled (default), 1-Enabled (EAP-MD5); #Require reboot; network.802_1x.mode = #Configure the username and password for 802.1x authentication. #Require reboot; network.802_1x.identity = network.802_1x.md5_password = #Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; #Require reboot; network.vpn_enable = #Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); #Require reboot; network.lldp.enable = #Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60. #Require reboot; network.lldp.packet_interval = ####################################################################################### ## Syslog Server ## ####################################################################################### #Configure the syslog mode; 1-Local, 2-Server; #Require reboot; syslog.mode = #Configure the IP address of the syslog server; #Require reboot; syslog.server = #Configure the syslog level. It ranges from 0 to 6, the default value is 3. #Require reboot; syslog.log_level = ####################################################################################### ## TR069 ## ####################################################################################### #The TR069 feature is only applicable to some designated firmware versions; #All settings of TR069 require reboot; #Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; managementserver.enable = #Configure the username and password for the phone to authenticate with the ACS; managementserver.username = managementserver.password = #Configure the access URL of the ACS; managementserver.url = #Configure the username and password for the phone to authenticate the connection requests; managementserver.connection_request_username = managementserver.connection_request_password = #Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; managementserver.periodic_inform_enable = 0 #Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. managementserver.periodic_inform_interval = ####################################################################################### ## Auto Provisioning ## ####################################################################################### #Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled(default); auto_provision.pnp_enable = #Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); auto_provision.mode = #Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; auto_provision.repeat.enable = #Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. auto_provision.repeat.minutes = #Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; auto_provision.weekly.enalbe = 0 #Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly. auto_provision.weekly.mask = 0123456 auto_provision.weekly.begin_time = 00:00 auto_provision.weekly.end_time = 00:00 #Configure the URL of the auto provisioning server. auto_provision.server.url = #Configure the username and password for downloading. auto_provision.server.username = {$http_auth_username} auto_provision.server.password = {$http_auth_password} #Configure the domain name of the PNP server. auto_provision.pnp_domain_name = #Configure the PNP vendor information. auto_provision.pnp_event_vendor = #Configure the name of the Common configuration file. auto_provision.common_file_name = #Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); auto_provision.dhcp_enable = #Configure the value (manufacturer of the device) of DHCP option 60. auto_provision.dhcp_option.option60_value = #Configure the custom DHCP option number. It ranges from 128 to 254. auto_provision.dhcp_option.list_user_options = #Configure AES key (16 characters) for decrypting the common CFG file. auto_provision.aes_key_16.com = #Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. auto_provision.aes_key_16.mac = ####################################################################################### ## Auto Provisioning Code ## ####################################################################################### #This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. #Require reboot; # "X" ranges from 1 to 50 #Configure the auto provisioning name. #The value format is String, the maximum length is 100; #autoprovision.x.name = #Configure the auto provisioning code. #The valid value is a string, the maximum length is 100. #autoprovision.x.code = #Configure the URL of the auto provisioning server. #The valid value is a string, the maximum length is 256. #autoprovision.x.url = #Configure the username and password for downloading. #The valid value is a string, the maximum length is 100. #autoprovision.x.user = #autoprovision.x.password = #Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. #autoprovision.x.com_aes = #autoprovision.x.mac_aes = autoprovision.1.name = autoprovision.1.code = autoprovision.1.url = autoprovision.1.user = autoprovision.1.password = autoprovision.1.com_aes = autoprovision.1.mac_aes = autoprovision.2.name = autoprovision.2.code = autoprovision.2.url = autoprovision.2.user = autoprovision.2.password = autoprovision.2.com_aes = autoprovision.2.mac_aes = ####################################################################################### ## Phone Features ## ####################################################################################### #Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); sip.use_23_as_pound = #Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; sip.rfc2543_hold = #Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); sip.use_out_bound_in_dialog = #Configure the registration random time (in seconds). It ranges from 0 (default) to 60. sip.reg_surge_prevention = #Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); watch_dog.enable = #Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; #0-Disabled, 1-Enabled (default); transfer.semi_attend_tran_enable = #Enable or disable the phone to complete the blind or attended transfer through on-hook; #0-Disabled (default), 1-Enabled; transfer.blind_tran_on_hook_enable = transfer.on_hook_trans_enable = #Enable or disable the conference initiator to transfer the call when hanging up; #0-Disabled (default), 1-Enabled; transfer.tran_others_after_conf_enable = #Enable or disable to access the web user interface of phone using the http/https protocol; #0-Disabled,1-Enabled (default); #Require Reboot; wui.https_enable = wui.http_enable = #Enable or disable the feature key synchronization, 0-Disabled (default), 1-Enabled; bw.feature_key_sync = #Enable or disable the conference feature on the phone, 0-Disabled, 1-Enabled(default); #Require reboot; features.conference_enable = #Enable or disable the hoteling feature, 0-Disabled (default), 1-Enabled; #Require reboot; features.hoteling.enable = #Enable or disable the ACD feature on the phone, 0-Disabled (default), 1-Enabled; #Require reboot; acd.enable = ####################################################################################### ## Voice ## ####################################################################################### #Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 5. voice.handfree.spk_vol = voice.handset.spk_vol = voice.headset.spk_vol = #Configure the ring volume. It ranges from 0 to 15, the default value is 5. voice.ring_vol = ####################################################################################### ## Security Settings ## ####################################################################################### #Enable or disable the phone to only accept the certificates in the Trusted Certificates list; #0-Disabled, 1-Enabled (default); security.trust_certificates = #Set the password of the user or the administrator, the value format is: user:password or admin:password; #security.user_password = admin:admin123 security.user_password = ####################################################################################### ## DSS Key ## ####################################################################################### #memorykey.x.line: Configure the desired line to apply the key feature. It ranges from 0 to 4. #The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. #But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. #memorykey.x.value: Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. #memorykey.x.pickup_value: Enter the pickup code, this parameter is only appilicable to BLF. #memorykey.x.type: Assign the desired feature to the memory key. #Valid types are:: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 10-Call Park # 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL 18-Group Listening 19-Public Hold 20-Private Hold # 21-Shared Line 22-XML Group 23-Group Pickup 24- Paging 25-Record 27-XMLbrowser 35-URLRecord 37-Switch 38-LDAP 39-BLF List # 40-Prefix 41- Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group #memorykey.x.xml_phonebook: Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #memorykey.x.label: configure the label for each key dispalying on LCD screen. # Configure DSS Key1 memorykey.1.line = memorykey.1.value = memorykey.1.pickup_value = memorykey.1.type = memorykey.1.xml_phonebook = memorykey.1.label = # Configure DSS Key2 memorykey.2.line = memorykey.2.value = memorykey.2.pickup_value = memorykey.2.type = memorykey.2.xml_phonebook = memorykey.2.label = # Configure DSS Key3 memorykey.3.line = memorykey.3.value = memorykey.3.pickup_value = memorykey.3.type = memorykey.3.xml_phonebook = memorykey.3.label = # Configure DSS Key4 memorykey.4.line = memorykey.4.value = memorykey.4.pickup_value = memorykey.4.type = memorykey.4.xml_phonebook = memorykey.4.label = # Configure DSS Key5 memorykey.5.line = memorykey.5.value = memorykey.5.pickup_value = memorykey.5.type = memorykey.5.xml_phonebook = memorykey.5.label = # Configure DSS Key6 memorykey.6.line = memorykey.6.value = memorykey.6.pickup_value = memorykey.6.type = memorykey.6.xml_phonebook = memorykey.6.label = # Configure DSS Key7 memorykey.7.line = memorykey.7.value = memorykey.7.pickup_value = memorykey.7.type = memorykey.7.xml_phonebook = memorykey.7.label = # Configure DSS Key8 memorykey.8.line = memorykey.8.value = memorykey.8.pickup_value = memorykey.8.type = memorykey.8.xml_phonebook = memorykey.8.label = # Configure DSS Key9 memorykey.9.line = memorykey.9.value = memorykey.9.pickup_value = memorykey.9.type = memorykey.9.xml_phonebook = memorykey.9.label = # Configure DSS Key10 memorykey.10.line = memorykey.10.value = memorykey.10.pickup_value = memorykey.10.type = memorykey.10.xml_phonebook = memorykey.10.label = # Configure DSS Key11 memorykey.11.line = memorykey.11.value = memorykey.11.pickup_value = memorykey.11.type = memorykey.11.xml_phonebook = memorykey.11.label = # Configure DSS Key12 memorykey.12.line = memorykey.12.value = memorykey.12.pickup_value = memorykey.12.type = memorykey.12.xml_phonebook = memorykey.12.label = # Configure DSS Key13 memorykey.13.line = memorykey.13.value = memorykey.13.pickup_value = memorykey.13.type = memorykey.13.xml_phonebook = memorykey.13.label = # Configure DSS Key14 memorykey.14.line = memorykey.14.value = memorykey.14.pickup_value = memorykey.14.type = memorykey.14.xml_phonebook = memorykey.14.label = # Configure DSS Key15 memorykey.15.line = memorykey.15.value = memorykey.15.pickup_value = memorykey.15.type = memorykey.15.xml_phonebook = memorykey.15.label = # Configure DSS Key16 memorykey.16.line = memorykey.16.value = memorykey.16.pickup_value = memorykey.16.type = memorykey.16.xml_phonebook = memorykey.16.label = # Configure DSS Key17 memorykey.17.line = memorykey.17.value = memorykey.17.pickup_value = memorykey.17.type = memorykey.17.xml_phonebook = memorykey.17.label = # Configure DSS Key18 memorykey.18.line = memorykey.18.value = memorykey.18.pickup_value = memorykey.18.type = memorykey.18.xml_phonebook = memorykey.18.label = ####################################################################################### ## Security ## ####################################################################################### #Enable or disable the phone to only accept the certificates in the Trusted Certificates list; #0-Disabled, 1-Enabled (default); #security.trust_certificates = #Define the login username and password of the user, var and administrator. #If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. #If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. #The following examples change the user's username to "user23" and the user's password to "user23pwd". #security.user_name.user = user23 #security.user_password = user23:user23pwd #The following examples change the var's username to "var55" and the var's password to "var55pwd". {if isset($user_name) } security.user_name.user = {$user_name} security.user_password = {$user_name}:{$user_password} {/if} {if isset($admin_name) } security.user_name.admin = {$admin_name} security.user_password = {$admin_name}:{$admin_password} {/if} {if isset($var_name) } security.user_name.var = {$var_name} security.user_password = {$var_name}:{$var_password} {/if} #Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; #Require reboot; security.var_enable = ####################################################################################### ## Line Key ## ####################################################################################### #The x of the parameter "linekey.x.line" ranges from 1 to 4. #The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. #linekey.x.lable--Define the label for each line key. #Configure Linekey1 linekey.1.line = linekey.1.value = linekey.1.pickup_value = linekey.1.type = linekey.1.xml_phonebook = linekey.1.label = #Configure Linekey2 linekey.2.line = linekey.2.value = linekey.2.pickup_value = linekey.2.type = linekey.2.xml_phonebook = linekey.2.label = #Configure Linekey3 linekey.3.line = linekey.3.value = linekey.3.pickup_value = linekey.3.type = linekey.3.xml_phonebook = linekey.3.label = #Configure Linekey4 linekey.4.line = linekey.4.value = linekey.4.pickup_value = linekey.4.type = linekey.4.xml_phonebook = linekey.4.label = ####################################################################################### # Action URL ## ####################################################################################### #action_url.incoming_call: configure the phone to send message to the specified server when receiving incoming call; #action_url.dnd_on: configure the phone to send message to the specified server when DND feature is activated; #The value format is: http://IP address of server/help.xml?mac=$mac #action_url.log_on = http://192.168.1.20/help.xml?mac=$mac action_url.setup_completed = action_url.log_on = action_url.log_off = action_url.register_failed = action_url.off_hook = action_url.on_hook = action_url.incoming_call = action_url.outgoing_call = action_url.call_established = action_url.dnd_on = action_url.dnd_off = action_url.always_fwd_on = action_url.always_fwd_off = action_url.busy_fwd_on = action_url.busy_fwd_off = action_url.no_answer_fwd_on = action_url.no_answer_fwd_off = action_url.transfer_call = action_url.blind_transfer_call = action_url.attended_transfer_call = action_url.hold = action_url.unhold = action_url.mute = action_url.unmute = action_url.missed_call = action_url.call_terminated = action_url.busy_to_idle = action_url.idle_to_busy = #Configure the phone to send message to the specified server when changing the IP address; action_url.ip_change = #Configure the phone to send message to the specified server when forwarding or rejecting incoming call, or answering new incoming call; action_url.forward_incoming_call = action_url.reject_incoming_call = action_url.answer_new_incoming_call = #Configure the phone to send message to the specified server when transfer finished/transfer failed; action_url.transfer_finished = action_url.transfer_failed = #Configure the phone to send message to the specified server when rejecting the new incoming call; action_url.reject_new_incoming_call = #Configure the phone to send message to the specified server when the phone cancels to call out,the remote called party is busy or the remote party cancels the call; action_url.cancel_callout = action_url.remote_busy = action_url.call_remote_canceled = ####################################################################################### ## Language Settings ## ####################################################################################### #Specify the web language, the valid values are: English, Chinese_S, German, Italian and Turkish; lang.wui = #Specify the LCD language, the valid values are: English (default), Chinese_S, German, French, Turkish, Italiano, Polish and Portungues; lang.gui = English ####################################################################################### ## Time Settings ## ####################################################################################### #Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. #The default time zone name is China(Beijing). #local_time.time_zone = +8 #local_time.time_zone_name = China(Beijing) local_time.time_zone = {$yealink_time_zone} local_time.time_zone_name = {$yealink_time_zone_name} #Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. local_time.ntp_server1 = {$ntp_server_primary} local_time.ntp_server2 = {$ntp_server_secondary} #Configure the update interval (in seconds) when using the NTP server. The default value is 1000. local_time.interval = #Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); local_time.summer_time = #Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; local_time.dst_time_type = #Configure the start time of DST. The default value is 1/1/0. #If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. #If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. #For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. local_time.start_time = {$yealink_time_zone_start_time} #Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. local_time.end_time = {$yealink_time_zone_end_time} #Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. local_time.offset_time = {$yealink_offset_time} #Configure the time format; 0-12 Hour, 1-24 Hour (default); local_time.time_format = {$yealink_time_format} #Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; local_time.date_format = {$yealink_date_format} #Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; local_time.dhcp_time = {$yealink_dhcp_time} #Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. local_time.manual_time_enable = ####################################################################################### ## Auto Redial ## ####################################################################################### #Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; auto_redial.enable = #Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. auto_redial.interval = 10 #Configure the times of auto redialing. It ranges from 1 to 300. The default value is 10. auto_redial.times = 10 ####################################################################################### ## Zero Touch ## ####################################################################################### #Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; zero_touch.enable = 0 #Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. zero_touch.wait_time = 5 ####################################################################################### ## Push XML ## ####################################################################################### push_xml.server = #Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; push_xml.block_in_calling = 0 #Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; push_xml.sip_notify = 0 ####################################################################################### ## Dial Plan ## ####################################################################################### #Configure the area code. dialplan.area_code.code = dialplan.area_code.min_len = 1 dialplan.area_code.max_len = 15 #When applying the rule to multiple lines, each line ID separated by comma. #e.g. dialplan.area_code.line_id = 1, 2, 3 dialplan.area_code.line_id = #Configure the block out number. X ranges from 1 to 10. #dialplan.block_out.number.x = dialplan.block_out.number.1 = #When applying the rule to multiple lines, each line ID separated by comma, e.g. 1,2,3. #dialplan.block_out.line_id.x = dialplan.block_out.line_id.1 = #Configure the dialnow rule for the phone. X ranges from 1 to 10; #dialplan.dialnow.rule.x = #dialplan.dialnow.line_id.x = dialplan.dialnow.rule.1 = dialplan.dialnow.line_id.1 = #Configure the replace rule. X ranges from 1 to 10; #dialplan.replace.prefix.x = #dialplan.replace.replace.x = #dialplan.replace.line_id.x = dialplan.replace.prefix.1 = dialplan.replace.replace.1 = dialplan.replace.line_id.1 = ####################################################################################### ## BSFT Phonebook ## ####################################################################################### #Configuration of BW phonebook. X ranges from 1 to 6. #bw_phonebook.display_name = #bw_phonebook.data.x.server = #bw_phonebook.data.x.port = #bw_phonebook.data.x.username = #bw_phonebook.data.x.password = #bw_phonebook.data.x.name = bw_phonebook.display_name = bw_phonebook.data.1.server = bw_phonebook.data.1.port = bw_phonebook.data.1.username = bw_phonebook.data.1.password = bw_phonebook.data.1.name = bw_phonebook.data.2.server = bw_phonebook.data.2.port = bw_phonebook.data.2.username = bw_phonebook.data.2.password = bw_phonebook.data.2.name = #X ranges from 1 to 6; #Configure the search parameter of broadsoft phonebook version 1.0; #bw_phonebook.search_list_v1.x = #Configure the search parameter of broadsoft phonebook version 2.0; #bw_phonebook.search_list_v2.x = #Configure the mode of search parameters; 0-AND, 1-OR (default); #bw_phonebook.search_mode_or.x = bw_phonebook.search_list_v1.1 = bw_phonebook.search_list_v2.2 = bw_phonebook.search_mode_or.3 = ####################################################################################### ## BSFT Call Log ## ####################################################################################### #Configuration of the BW call log. X ranges from 1 to 6. #This feature is only applicable to some designated firmware version; #bw_call_log.display_name = #bw_call_log.data.x.server = #bw_call_log.data.x.port = #bw_call_log.data.x.username = #bw_call_log.data.x.password = #bw_call_log.data.x.name = bw_call_log.display_name = bw_call_log.data.1.server = bw_call_log.data.1.port = bw_call_log.data.1.username = bw_call_log.data.1.password = bw_call_log.data.1.name = bw_call_log.data.2.server = bw_call_log.data.2.port = bw_call_log.data.2.username = bw_call_log.data.2.password = bw_call_log.data.2.name = ####################################################################################### ## Remote Phonebook ## ####################################################################################### #Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. remote_phonebook.display_name = {if isset($yealink_remote_phonebook_1_name) } remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name} {else} remote_phonebook.data.1.name = Users {/if} {if isset($yealink_remote_phonebook_1_url) } remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url} {else} remote_phonebook.data.1.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=users {/if} {if isset($yealink_remote_phonebook_2_name) } remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name} {else} remote_phonebook.data.2.name = Groups {/if} {if isset($yealink_remote_phonebook_2_url) } remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url} {else} remote_phonebook.data.2.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=groups {/if} {if isset($yealink_remote_phonebook_3_name) } remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name} {else} remote_phonebook.data.3.name = Extensions {/if} {if isset($yealink_remote_phonebook_3_url) } remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url} {else} remote_phonebook.data.3.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=extensions {/if} remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name} remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url} remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name} remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url} ####################################################################################### ## Network Directory ## ####################################################################################### #Configure the interval(in minutes) for the phone to update phonebook,(1440 by default); directory.update_time_interval = #Enable or disable the phone to match the incoming call with the contact in the remote phonebook; 0-Disabled, 1-Enabled(default); directory.incoming_call_match_enable = #Enable or disable the broadsoft directory; 0-Disabled (default), 1-Enabled; bw.directory_enable = ####################################################################################### ## LDAP Settings ## ####################################################################################### #Enable or disable the LDAP feature; 0-Disabled(default), 1-Enabled; ldap.enable = #Custom the display name of the LDAP. ldap.customize_label = #Configure the search criteria for name and number lookups. ldap.name_filter = ldap.number_filter = ldap.host = ldap.port = 389 ldap.base = ldap.user = ldap.password = #Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. ldap.max_hits = 50 ldap.name_attr = ldap.numb_attr = ldap.display_name = #Configure the LDAP version. The valid value is 2 or 3 (default). ldap.version = 3 #Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; ldap.call_in_lookup = 0 #Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; ldap.ldap_sort = 0 ####################################################################################### ## Phone Settings ## ####################################################################################### #Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; #features.dnd_refuse_code = 480 #Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). features.normal_refuse_code = 486 features.call_completion_enable = 0 features.dnd.on_code = features.dnd.off_code = #Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); call_waiting.enable = 1 #Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); call_waiting.tone = #Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); features.intercom.allow = #Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; features.intercom.mute = #Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); features.intercom.tone = #Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); features.intercom.barge = #Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 4. features.hotline_number = features.hotline_delay = #Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. features.busy_tone_delay = #Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; features.pound_key.mode = #Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); features.send_key_tone = features.key_tone = features.redial_tone = #Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); features.save_call_history = #Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; #Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); features.action_uri_limit_ip = #Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. features.relog_offtime = 5 #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); #Require reboot; features.direct_ip_call_enable = 0 #Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; features.ringer_device.is_use_headset = 0 #Enable or disable the phone to display the local camera when in the fullscreen state, 0-Disabled, 1-Enabled(default); features.fullscreen_local_visible = 1 #Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = 4 #Configure the ring tone for the phone. System ring tones are: common (default), Ring1.wav, Ring2.wavˇ­ˇ­Ring8.wav. #If you set the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Custom:Busy.wav #If you set the system ring tone (Ring2.wav) for the phone, the value is: phone_setting.ring_type = Resource:Ring2.wav phone_setting.ring_type = #Configure the active backlight level, Integer,1-10 (6 by default); phone_setting.active_backlight_level = #Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. phone_setting.inactive_backlight_level = 1 #Configure the backlight time (in seconds). The valid values are 1-Always on, 60 (default), 120, 300, 600, 1800. phone_setting.backlight_time = #Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; phone_setting.predial_autodial = 1 #Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); phone_setting.is_deal180 = 1 #Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 4. phone_setting.dialnow_delay = 4 #Enable or disable the phone to display the shortcut menu on the idle screen; 0-Disabled (default), 1-Enabled; phone_setting.shortcuts_enable = 0 #Enable or disable the phone to display the recent call in the pre-dial interface; 0-Disabled, 1-Enabled (default); super_search.recent_call = 1 #Enable or disable the phone to display the soft dialpad in the pre-dial interface; 0-Disabled, 1-Enabled (default); super_search.dial_pad = 1 #Enable or disable the phone to hide the value N/A of the DSS key; 0-Disabled (default), 1-Enabled; #Require reboot; phone_setting.dsskey_hide_enable = #Enable or disable the phone to configure the soft key on the idle screen; 0-Disabled (default), 1-Enabled; #Require reboot; phone_setting.softkey_enable = #Enable or disable the phone to strip out the URL from the alert-info header; 0-Disabled, 1-Enabled (default); phone_setting.parse_ring_url_enable = #Enable or disable the Tel mode; 0-SIP (default), 1-Tel; phone_setting.tel_mode = #Enable or disable the action URL feature; 0-Disabled, 1-Enabled (default); phone_setting.action_uri_enable = #Enable or disable the phone to display the Account menu icon; 0-Disabled, 1-Enabled (default); #Require reboot; phone_setting.account_show_enable = ####################################################################################### ## Configure a server URL for firmware update ## ####################################################################################### firmware.url = ####################################################################################### ## Configure a server URL for customizing a ringtones ## ####################################################################################### ringtone.url = #ringtone.delete = http://localhost/all,delete all the customized ring tones; ringtone.delete = ####################################################################################### ## Certificates ## ####################################################################################### trusted_certificates.url = #trusted_certificates.delete = http://localhost/all,delete all the trusted certificates; trusted_certificates.delete = server_certificates.url = #server_certificates.delete = http://localhost/all, delete the server certificate; server_certificates.delete = ####################################################################################### ## Local Contact/DST Time/Dialnow Rule/Replace Rule ## ####################################################################################### local_contact.data.url = auto_dst.url = dialplan_dialnow.url = dialplan_replace_rule.url = ####################################################################################### ## Customized Factory Configurations ## ####################################################################################### #Configure the access URL for downloading the customized factory configurations; custom_factory_configuration.url = ####################################################################################### ## Camera/Doorphone data/Contact image/Wallpaper ## ####################################################################################### #Configure the access URL for downloading the camera data; doorphone_data.url = #Configure access URL for downloading customized image of local contact; local_contact_image.url = #Configure the server address for uploading a .tar file which contains mutiple contact images; local_contact_image.tar.url = #Configure the access URL for downloading the customized wallpaper; wallpaper_upload.url = {$yealink_vp530_wallpaper} #Configure the phone background. #If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png #If you set the system image (1.jpg) as phone backgroup, the value is: phone_setting.backgrounds = Resource:1.jpg phone_setting.backgrounds = Config:yealink_vp530_wallpaper.png ####################################################################################### ## Call List ## ####################################################################################### #Configure the access URL for downloading the call list; #Require reboot; call_list.url = ####################################################################################### ## OpenVPN ## ####################################################################################### #Configure the access URL for downloading the open VPN tar; openvpn.url = ####################################################################################### ## Level ## ####################################################################################### #Configure the access URL for downloading the files for var. #Before using this parameter, you should store the desired files to the provisioning server. #Require reboot web_item_level.url = ####################################################################################### ## Super Search URL ## ####################################################################################### super_search.url = ####################################################################################### ## Directory Setting ## ####################################################################################### #Configure the access URL of the directory setting file. directory_setting.url = {$yealink_directory_setting_url} ####################################################################################### ## Shortcut Keys ## ####################################################################################### #Uploading the settings of the shortcut keys; #Require reboot; dialing_shortcut.url=