Chris Black
1267 lines
53 KiB
INI
1267 lines
53 KiB
INI
#!version:1.0.0.1
|
|
|
|
##File header "#!version:1.0.0.1" can not be edited or deleted.##
|
|
|
|
#######################################################################################
|
|
## Network ##
|
|
#######################################################################################
|
|
|
|
#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, subnet mask, gateway and DNS server.
|
|
#Require Reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
network.primary_dns=
|
|
network.secondary_dns =
|
|
|
|
#Configure the username and password for PPPOE connection.
|
|
#Require reboot;
|
|
network.pppoe.user =
|
|
network.pppoe.password =
|
|
|
|
#Configure the PC port type; 0-Router, 1-Bridge (default);
|
|
#Require reboot;
|
|
network.bridge_mode =
|
|
|
|
#Configure the IP address and mask when the PC port is configured as Router.
|
|
#Require reboot;
|
|
network.pc_port.ip =
|
|
network.pc_port.mask =
|
|
|
|
#Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default);
|
|
#Require reboot;
|
|
network.pc_port.dhcp_server =
|
|
|
|
#Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100.
|
|
network.dhcp.start_ip =
|
|
network.dhcp.end_ip =
|
|
|
|
#Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
network.vlan.internet_port_enable =
|
|
|
|
#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1.
|
|
#Require reboot;
|
|
network.vlan.internet_port_vid =
|
|
|
|
#Configure the VLAN priority, it ranges from 0 (default) to 7.
|
|
#Require reboot;
|
|
network.vlan.internet_port_priority =
|
|
|
|
#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
network.vlan.pc_port_enable =
|
|
|
|
#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1.
|
|
#Require reboot;
|
|
network.vlan.pc_port_vid =
|
|
|
|
#Configure the VLAN priority, it ranges from 0 (default) to 7.
|
|
#Require reboot;
|
|
network.vlan.pc_port_priority =
|
|
|
|
#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only;
|
|
#Require reboot;
|
|
network.web_server_type =
|
|
|
|
#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535.
|
|
#Require reboot;
|
|
network.port.http =
|
|
network.port.https =
|
|
|
|
#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800.
|
|
#Require reboot;
|
|
network.port.max_rtpport =
|
|
|
|
#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780.
|
|
#Require reboot;
|
|
network.port.min_rtpport =
|
|
|
|
#Configure the voice QOS. It ranges from 0 to 63, the default value is 46.
|
|
#Require reboot;
|
|
network.qos.rtptos =
|
|
|
|
#Configure the SIP QOS. It ranges from 0 to 63, the default value is 46.
|
|
#Require reboot;
|
|
network.qos.signaltos =
|
|
|
|
#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2;
|
|
#Require reboot;
|
|
network.802_1x.mode =
|
|
|
|
#Configure the username and password for 802.1x authentication.
|
|
#Require reboot;
|
|
network.802_1x.identity =
|
|
network.802_1x.md5_password =
|
|
|
|
#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
network.vpn_enable =
|
|
|
|
#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default);
|
|
#Require reboot;
|
|
network.lldp.enable =
|
|
|
|
#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 120.
|
|
#Require reboot;
|
|
network.lldp.packet_interval =
|
|
|
|
#Enable or disable the phone to obtain DNS from DHCP; 0-Disabled, 1-Enabled (default);
|
|
#Require reboot;
|
|
network.static_dns_enable =
|
|
|
|
#######################################################################################
|
|
## Syslog Server ##
|
|
#######################################################################################
|
|
|
|
#Configure the IP address of the syslog server.
|
|
#Require reboot;
|
|
syslog.server =
|
|
|
|
#Configure the syslog level. It ranges from 0 to 6, the default value is 3.
|
|
#Require reboot;
|
|
syslog.log_level =
|
|
|
|
#######################################################################################
|
|
## TR069 ##
|
|
#######################################################################################
|
|
|
|
#The TR069 feature is only applicable to some designated firmware versions.
|
|
#All settings of TR069 require reboot.
|
|
#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled;
|
|
managementserver.enable =
|
|
|
|
#Configure the username and password for the phone to authenticate with the ACS.
|
|
managementserver.username =
|
|
managementserver.password =
|
|
|
|
#Configure the access URL of the ACS.
|
|
managementserver.url =
|
|
|
|
#Configure the username and password for the phone to authenticate the connection requests.
|
|
managementserver.connection_request_username =
|
|
managementserver.connection_request_password =
|
|
|
|
#Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled;
|
|
managementserver.periodic_inform_enable =
|
|
|
|
#Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60.
|
|
managementserver.periodic_inform_interval =
|
|
|
|
#######################################################################################
|
|
## Auto Provisioning ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default);
|
|
auto_provision.pnp_enable =
|
|
|
|
#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default);
|
|
auto_provision.mode =
|
|
|
|
#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled;
|
|
auto_provision.repeat.enable =
|
|
|
|
#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440.
|
|
auto_provision.repeat.minutes =
|
|
|
|
#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled;
|
|
auto_provision.weekly.enable =
|
|
|
|
#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly;
|
|
#auto_provision.weekly.mask = 0123456
|
|
#auto_provision.weekly.begin_time = 00:00
|
|
#auto_provision.weekly.end_time = 00:00
|
|
|
|
auto_provision.weekly.mask =
|
|
auto_provision.weekly.begin_time =
|
|
auto_provision.weekly.end_time =
|
|
|
|
#Configure the URL of the auto provisioning server.
|
|
auto_provision.server.url = {$yealink_provision_url}
|
|
|
|
#Configure the domain name of the PNP server.
|
|
auto_provision.pnp_domain_name =
|
|
|
|
#Configure the PNP vendor information.
|
|
auto_provision.pnp_event_vendor =
|
|
|
|
#Configure the name of the Common configuration file.
|
|
auto_provision.common_file_name =
|
|
|
|
#Configure the username and password for downloading.
|
|
auto_provision.server.username = {$http_auth_username}
|
|
auto_provision.server.password = {$http_auth_password}
|
|
|
|
#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default);
|
|
auto_provision.dhcp_option.enable =
|
|
|
|
#Configure the value (manufacturer of the device) of DHCP option 60.
|
|
auto_provision.dhcp_option.option60_value =
|
|
|
|
#Configure the custom DHCP option number. It ranges from 128 to 254.
|
|
auto_provision.dhcp_option.list_user_options =
|
|
|
|
#Configure AES key (16 characters) for decrypting the common CFG file.
|
|
auto_provision.aes_key_16.com =
|
|
|
|
#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file.
|
|
auto_provision.aes_key_16.mac =
|
|
|
|
#######################################################################################
|
|
## Auto Provisioning Code ##
|
|
#######################################################################################
|
|
|
|
#This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts.
|
|
#Require reboot;
|
|
#"X" ranges from 1 to 50
|
|
|
|
#Configure the auto provisioning name.
|
|
#The valid value is a string, the maximum length is 100.
|
|
#autoprovision.x.name =
|
|
|
|
#Configure the auto provisioning code.
|
|
#The valid value is a string, the maximum length is 100.
|
|
#autoprovision.x.code =
|
|
|
|
#Configure the URL of the auto provisioning server.
|
|
#The valid value is a string, the maximum length is 256.
|
|
#autoprovision.x.url =
|
|
|
|
#Configure the username and password for downloading.
|
|
#The valid value is a string, the maximum length is 100.
|
|
#autoprovision.x.user =
|
|
#autoprovision.x.password =
|
|
|
|
#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file.
|
|
#autoprovision.x.com_aes =
|
|
#autoprovision.x.mac_aes =
|
|
|
|
autoprovision.1.name =
|
|
autoprovision.1.code =
|
|
autoprovision.1.url =
|
|
autoprovision.1.user =
|
|
autoprovision.1.password =
|
|
autoprovision.1.com_aes =
|
|
autoprovision.1.mac_aes =
|
|
|
|
autoprovision.2.name =
|
|
autoprovision.2.code =
|
|
autoprovision.2.url =
|
|
autoprovision.2.user =
|
|
autoprovision.2.password =
|
|
autoprovision.2.com_aes =
|
|
autoprovision.2.mac_aes =
|
|
|
|
#######################################################################################
|
|
## Phone Features ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default);
|
|
sip.use_23_as_pound =
|
|
|
|
#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled;
|
|
sip.rfc2543_hold =
|
|
|
|
#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default);
|
|
sip.use_out_bound_in_dialog =
|
|
|
|
#Configure the registration random time (in seconds). It ranges from 0 (default) to 60.
|
|
sip.reg_surge_prevention =
|
|
|
|
sip.check_autop_result_before_register =
|
|
|
|
sip.send_response_by_request =
|
|
|
|
#Enable or disable the phone to reboot when receiving SIP notify messages; 0-Disabled, 1-Enabled (default);
|
|
sip.notify_reboot_enable =
|
|
|
|
#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default);
|
|
watch_dog.enable =
|
|
|
|
#Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled;
|
|
redirect.enable =
|
|
|
|
#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call;
|
|
#0-Disabled, 1-Enabled (default);
|
|
transfer.semi_attend_tran_enable =
|
|
|
|
#Enable or disable the phone to complete the blind or attended transfer through on-hook;
|
|
#0-Disabled,1-Enabled(default);
|
|
transfer.blind_tran_on_hook_enable =
|
|
transfer.on_hook_trans_enable =
|
|
|
|
#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default);
|
|
transfer.dsskey_deal_type =
|
|
|
|
#Enable or disable the conference initiator to transfer the call when hanging up;
|
|
#0-Disabled(default),1-Enabled;
|
|
transfer.tran_others_after_conf_enable =
|
|
|
|
#######################################################################################
|
|
## Voice ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled;
|
|
voice.vad =
|
|
|
|
#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default);
|
|
voice.cng =
|
|
|
|
#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default);
|
|
voice.echo_cancellation =
|
|
|
|
#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3.
|
|
voice.side_tone=
|
|
|
|
#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29.
|
|
#Require reboot;
|
|
voice.handfree_send =
|
|
voice.handset_send =
|
|
voice.headset_send =
|
|
|
|
#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default);
|
|
voice.jib.adaptive =
|
|
|
|
#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120.
|
|
voice.jib.min =
|
|
voice.jib.max =
|
|
voice.jib.normal =
|
|
|
|
#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on.
|
|
#voice.tone.country = Custom
|
|
voice.tone.country =
|
|
|
|
#Customize the tone when the "voice.tone.country" is configured as Custom.
|
|
#The value format: Frequency/Duration.
|
|
#Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones.
|
|
#A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4).
|
|
#Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms.
|
|
#At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by comma.
|
|
#For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800
|
|
voice.tone.dial =
|
|
voice.tone.ring =
|
|
voice.tone.busy =
|
|
voice.tone.congestion =
|
|
voice.tone.callwaiting =
|
|
voice.tone.dialrecall =
|
|
voice.tone.record=
|
|
voice.tone.info =
|
|
voice.tone.stutter =
|
|
voice.tone.message =
|
|
voice.tone.autoanswer =
|
|
|
|
#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8.
|
|
voice.handfree.spk_vol =
|
|
voice.handset.spk_vol =
|
|
voice.headset.spk_vol =
|
|
|
|
#Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8.
|
|
voice.handfree.tone_vol =
|
|
voice.handset.tone_vol =
|
|
voice.headset.tone_vol =
|
|
|
|
#Configure the ring volume. It ranges from 0 to 15, the default value is 8.
|
|
voice.ring_vol=
|
|
|
|
#Configure the Speaker volume when in the group listening mode. It ranges from 0 to 15, the default value is 8.
|
|
voice.group_spk_vol =
|
|
|
|
#######################################################################################
|
|
## Security Settings ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the phone to only accept the certificates in the Trusted Certificates list;
|
|
#0-Disabled, 1-Enabled (default);
|
|
security.trust_certificates =
|
|
|
|
#Define the login username and password of the user, var and administrator.
|
|
#If your username is defined as: security.user_name.admin = adminuser.
|
|
#and your password must like this: security.user_password = adminuser:adminpassword.
|
|
#adminuser is the value of "security.user_name.admin"; adminpassword is the password you want to set.
|
|
{if isset($user_name) }
|
|
security.user_name.user = {$user_name}
|
|
security.user_password = {$user_name}:{$user_password}
|
|
{/if}
|
|
{if isset($admin_name) }
|
|
security.user_name.admin = {$admin_name}
|
|
security.user_password = {$admin_name}:{$admin_password}
|
|
{/if}
|
|
{if isset($var_name) }
|
|
security.user_name.var = {$var_name}
|
|
security.user_password = {$var_name}:{$var_password}
|
|
{/if}
|
|
|
|
#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
security.var_enable =
|
|
|
|
#######################################################################################
|
|
## Customize the softkey ##
|
|
#######################################################################################
|
|
#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking.
|
|
custom_softkey_call_failed.url =
|
|
custom_softkey_call_in.url =
|
|
custom_softkey_connecting.url =
|
|
custom_softkey_dialing.url =
|
|
custom_softkey_ring_back.url =
|
|
custom_softkey_talking.url =
|
|
|
|
#######################################################################################
|
|
## Memory Key (For T38G only) ##
|
|
#######################################################################################
|
|
#X ranges from 1 to 10;
|
|
#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
|
|
#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line.
|
|
#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1.
|
|
#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user.
|
|
#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF.
|
|
#memorykey.x.type--Assign the desired feature to the memory key.
|
|
#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS
|
|
# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL
|
|
# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser
|
|
# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group
|
|
#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
|
|
#memorykey.x.sub_type =
|
|
|
|
# Configure Memory Key1
|
|
memorykey.1.line =
|
|
memorykey.1.value =
|
|
memorykey.1.pickup_value =
|
|
memorykey.1.type =
|
|
memorykey.1.xml_phonebook =
|
|
memorykey.1.sub_type =
|
|
|
|
# Configure Memory Key2
|
|
memorykey.2.line =
|
|
memorykey.2.value =
|
|
memorykey.2.pickup_value =
|
|
memorykey.2.type =
|
|
memorykey.2.xml_phonebook =
|
|
memorykey.2.sub_type =
|
|
|
|
# Configure Memory Key3
|
|
memorykey.3.line =
|
|
memorykey.3.value =
|
|
memorykey.3.pickup_value =
|
|
memorykey.3.type =
|
|
memorykey.3.xml_phonebook =
|
|
memorykey.3.sub_type =
|
|
|
|
# Configure DSS Key4
|
|
memorykey.4.line =
|
|
memorykey.4.value =
|
|
memorykey.4.pickup_value =
|
|
memorykey.4.type =
|
|
memorykey.4.xml_phonebook =
|
|
memorykey.4.sub_type =
|
|
|
|
# Configure Memory Key5
|
|
memorykey.5.line =
|
|
memorykey.5.value =
|
|
memorykey.5.pickup_value =
|
|
memorykey.5.type =
|
|
memorykey.5.xml_phonebook =
|
|
memorykey.5.sub_type =
|
|
|
|
# Configure Memory Key6
|
|
memorykey.6.line =
|
|
memorykey.6.value =
|
|
memorykey.6.pickup_value =
|
|
memorykey.6.type =
|
|
memorykey.6.xml_phonebook =
|
|
memorykey.6.sub_type =
|
|
|
|
# Configure Memory Key7
|
|
memorykey.7.line =
|
|
memorykey.7.value =
|
|
memorykey.7.pickup_value =
|
|
memorykey.7.type =
|
|
memorykey.7.xml_phonebook =
|
|
memorykey.7.sub_type =
|
|
|
|
# Configure Memory Key8
|
|
memorykey.8.line =
|
|
memorykey.8.value =
|
|
memorykey.8.pickup_value =
|
|
memorykey.8.type =
|
|
memorykey.8.xml_phonebook =
|
|
memorykey.8.sub_type =
|
|
|
|
# Configure Memory Key9
|
|
memorykey.9.line =
|
|
memorykey.9.value =
|
|
memorykey.9.pickup_value =
|
|
memorykey.9.type =
|
|
memorykey.9.xml_phonebook =
|
|
memorykey.9.sub_type =
|
|
|
|
# Configure Memory Key10
|
|
memorykey.10.line =
|
|
memorykey.10.value =
|
|
memorykey.10.pickup_value =
|
|
memorykey.10.type =
|
|
memorykey.10.xml_phonebook =
|
|
memorykey.10.sub_type =
|
|
|
|
#######################################################################################
|
|
## Line Key ##
|
|
#######################################################################################
|
|
|
|
#The x of the parameter "linekey.x.line" ranges from 1 to 6.
|
|
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
|
|
#linekey.x.lable--Define the label for each line key.
|
|
|
|
#Configure Line Key1
|
|
linekey.1.line =
|
|
linekey.1.value =
|
|
linekey.1.pickup_value =
|
|
linekey.1.type =
|
|
linekey.1.xml_phonebook =
|
|
linekey.1.label =
|
|
|
|
#Configure Line Key2
|
|
linekey.2.line =
|
|
linekey.2.value =
|
|
linekey.2.pickup_value =
|
|
linekey.2.type =
|
|
linekey.2.xml_phonebook =
|
|
linekey.2.label =
|
|
|
|
#Configure Line Key3
|
|
linekey.3.line =
|
|
linekey.3.value =
|
|
linekey.3.pickup_value =
|
|
linekey.3.type =
|
|
linekey.3.xml_phonebook =
|
|
linekey.3.label =
|
|
|
|
#Configure Line Key4 (for T38G only)
|
|
linekey.4.line =
|
|
linekey.4.value =
|
|
linekey.4.pickup_value =
|
|
linekey.4.type =
|
|
linekey.4.xml_phonebook =
|
|
linekey.4.label =
|
|
|
|
#Configure Line Key5 (for T38G only)
|
|
linekey.5.line =
|
|
linekey.5.value =
|
|
linekey.5.pickup_value =
|
|
linekey.5.type =
|
|
linekey.5.xml_phonebook =
|
|
linekey.5.label =
|
|
|
|
#Configure Line Key6 (for T38G only)
|
|
linekey.6.line =
|
|
linekey.6.value =
|
|
linekey.6.pickup_value =
|
|
linekey.6.type =
|
|
linekey.6.xml_phonebook =
|
|
linekey.6.label =
|
|
|
|
##########################################################################################
|
|
## Programmable Key (For T38G only) ##
|
|
##########################################################################################
|
|
#X ranges from 1 to 15.
|
|
#programablekey.x.type--Customize the programmable key type.
|
|
#The valid types are:
|
|
#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom
|
|
#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook
|
|
#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock
|
|
#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
|
|
#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line.
|
|
#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1.
|
|
|
|
#programablekey.x.value =
|
|
#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
|
|
#programablekey.x.history_type =
|
|
|
|
#programablekey.x.label--This parameter is only available to the key 1 to key 4.
|
|
|
|
programablekey.1.type =
|
|
programablekey.1.line =
|
|
programablekey.1.value =
|
|
programablekey.1.xml_phonebook =
|
|
programablekey.1.history_type =
|
|
programablekey.1.label =
|
|
|
|
##########################################################################################
|
|
## Expansion Key ��For T38G only�� ##
|
|
##########################################################################################
|
|
#X ranges from 1 to 6, Y ranges from 1 to 39.
|
|
#expansion_module.x.key.y.type = 37 (Switch by default)
|
|
#expansion_module.x.key.y.line = 0
|
|
#expansion_module.x.key.y.value =
|
|
#expansion_module.x.key.y.pickup_value =
|
|
#expansion_module.x.key.y.label =
|
|
|
|
#Each expansion module1 key1
|
|
expansion_module.1.key.1.type =
|
|
expansion_module.1.key.1.line =
|
|
expansion_module.1.key.1.value =
|
|
expansion_module.1.key.1.pickup_value =
|
|
expansion_module.1.key.1.label =
|
|
|
|
#Each expansion module1 key2
|
|
expansion_module.1.key.2.type =
|
|
expansion_module.1.key.2.line =
|
|
expansion_module.1.key.2.value =
|
|
expansion_module.1.key.2.pickup_value =
|
|
expansion_module.1.key.2.label =
|
|
|
|
#Each expansion module2 key1
|
|
expansion_module.2.key.1.type =
|
|
expansion_module.2.key.1.line =
|
|
expansion_module.2.key.1.value =
|
|
expansion_module.2.key.1.pickup_value =
|
|
expansion_module.2.key.1.label =
|
|
|
|
#######################################################################################
|
|
## Automatic Call Distribute ##
|
|
#######################################################################################
|
|
#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled;
|
|
acd.auto_available =
|
|
|
|
#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60.
|
|
acd.auto_available_timer =
|
|
|
|
#######################################################################################
|
|
# Action URL Settings ##
|
|
#######################################################################################
|
|
|
|
#action_url.setup_completed--Inform the server that the phone has completed the startup.
|
|
#action_url.dnd_on-- Inform the server that the DND is activated on the phone.
|
|
#The value format is: http://IP address of server/help.xml?variable name=variable value.
|
|
#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version.
|
|
#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation.
|
|
#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation.
|
|
#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation.
|
|
#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls.
|
|
#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls.
|
|
#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls.
|
|
#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls.
|
|
#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation.
|
|
#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac
|
|
|
|
action_url.setup_completed =
|
|
action_url.log_on =
|
|
action_url.log_off =
|
|
action_url.register_failed =
|
|
action_url.off_hook =
|
|
action_url.on_hook =
|
|
action_url.incoming_call =
|
|
action_url.outgoing_call =
|
|
action_url.call_established =
|
|
action_url.dnd_on =
|
|
action_url.dnd_off =
|
|
action_url.always_fwd_on =
|
|
action_url.always_fwd_off =
|
|
action_url.busy_fwd_on =
|
|
action_url.busy_fwd_off =
|
|
action_url.no_answer_fwd_on =
|
|
action_url.no_answer_fwd_off =
|
|
action_url.transfer_call =
|
|
action_url.blind_transfer_call =
|
|
action_url.attended_transfer_call =
|
|
action_url.hold =
|
|
action_url.unhold =
|
|
action_url.mute =
|
|
action_url.unmute =
|
|
action_url.missed_call =
|
|
action_url.call_terminated =
|
|
action_url.busy_to_idle =
|
|
action_url.idle_to_busy =
|
|
action_url.forward_incoming_call =
|
|
action_url.reject_incoming_call =
|
|
action_url.answer_new_incoming_call =
|
|
action_url.transfer_finished =
|
|
action_url.transfer_failed =
|
|
|
|
#######################################################################################
|
|
## Language Settings ##
|
|
#######################################################################################
|
|
|
|
#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech.
|
|
lang.wui =
|
|
|
|
#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese.
|
|
#lang.gui = English
|
|
lang.gui =
|
|
|
|
#######################################################################################
|
|
## Time Settings ##
|
|
#######################################################################################
|
|
|
|
#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8.
|
|
#The default time zone name is China(Beijing).
|
|
#local_time.time_zone = +8
|
|
#local_time.time_zone_name = China(Beijing)
|
|
local_time.time_zone = {$yealink_time_zone}
|
|
local_time.time_zone_name = {$yealink_time_zone_name}
|
|
|
|
#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
|
|
local_time.ntp_server1 = {$ntp_server_primary}
|
|
local_time.ntp_server2 = {$ntp_server_secondary}
|
|
|
|
#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
|
|
local_time.interval =
|
|
|
|
#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
|
|
local_time.summer_time =
|
|
|
|
#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week;
|
|
local_time.dst_time_type =
|
|
|
|
#Configure the start time of DST. The default value is 1/1/0.
|
|
#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20.
|
|
#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day.
|
|
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January.
|
|
local_time.start_time = {$yealink_time_zone_start_time}
|
|
|
|
#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time.
|
|
local_time.end_time = {$yealink_time_zone_end_time}
|
|
|
|
#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank.
|
|
local_time.offset_time = {$yealink_offset_time}
|
|
|
|
#Configure the time format; 0-12 Hour, 1-24 Hour (default);
|
|
local_time.time_format = {$yealink_time_format}
|
|
|
|
#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM;
|
|
local_time.date_format = {$yealink_date_format}
|
|
|
|
#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled;
|
|
local_time.dhcp_time = {$yealink_dhcp_time}
|
|
|
|
#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0.
|
|
local_time.manual_time_enable =
|
|
|
|
#######################################################################################
|
|
## Hot Desking ##
|
|
#######################################################################################
|
|
#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled;
|
|
#hotdesking.startup_register_name_enable = 0 (default)
|
|
#hotdesking.startup_username_enable = 1 (default)
|
|
#hotdesking.startup_password_enable = 1 (default)
|
|
#hotdesking.startup_sip_server_enable = 1 (default)
|
|
#hotdesking.startup_outbound_enable = 0 (default)
|
|
|
|
hotdesking.startup_register_name_enable =
|
|
hotdesking.startup_username_enable =
|
|
hotdesking.startup_password_enable =
|
|
hotdesking.startup_sip_server_enable =
|
|
hotdesking.startup_outbound_enable =
|
|
|
|
#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key;
|
|
#0-Disabled, 1-Enabled;
|
|
#hotdesking.dsskey_register_name_enable = 0 (default)
|
|
#hotdesking.dsskey_username_enable = 1 (default)
|
|
#hotdesking.dsskey_password_enable = 1 (default)
|
|
#hotdesking.dsskey_sip_server_enable = 1 (default)
|
|
#hotdesking.dsskey_outbound_enable = 0 (default)
|
|
|
|
hotdesking.dsskey_register_name_enable =
|
|
hotdesking.dsskey_username_enable =
|
|
hotdesking.dsskey_password_enable =
|
|
hotdesking.dsskey_sip_server_enable =
|
|
hotdesking.dsskey_outbound_enable =
|
|
|
|
#######################################################################################
|
|
## Distinctive Ring Tones ##
|
|
#######################################################################################
|
|
|
|
#"X" ranges from 1 to 10;
|
|
#Configure the text to map the keywords contained in the "Alert-info" header.
|
|
#distinctive_ring_tones.alert_info.X.text = family
|
|
distinctive_ring_tones.alert_info.1.text =
|
|
|
|
#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav.
|
|
#distinctive_ring_tones.alert_info.X.ringer = 1
|
|
distinctive_ring_tones.alert_info.1.ringer =
|
|
|
|
#######################################################################################
|
|
## Auto Redial ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled;
|
|
auto_redial.enable =
|
|
|
|
#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10.
|
|
auto_redial.interval =
|
|
|
|
#Configure the times of auto redialing . It ranges from 1 to 300. The default value is 10.
|
|
auto_redial.times =
|
|
|
|
#######################################################################################
|
|
## Zero Touch ##
|
|
#######################################################################################
|
|
#Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled;
|
|
zero_touch.enable =
|
|
|
|
#Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5.
|
|
zero_touch.wait_time =
|
|
|
|
#######################################################################################
|
|
## Push XML ##
|
|
#######################################################################################
|
|
|
|
push_xml.server =
|
|
|
|
#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled;
|
|
push_xml.block_in_calling =
|
|
|
|
#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled;
|
|
push_xml.sip_notify =
|
|
|
|
#######################################################################################
|
|
## Dial Plan ##
|
|
#######################################################################################
|
|
|
|
#Configure the area code.
|
|
dialplan.area_code.code =
|
|
dialplan.area_code.min_len = 1
|
|
dialplan.area_code.max_len = 15
|
|
|
|
#When applying the rule to multiple lines, each line ID separated by comma.
|
|
#e.g. dialplan.area_code.line_id = 1, 2, 3
|
|
dialplan.area_code.line_id =
|
|
|
|
#Configure the block out number. X ranges from 1 to 10.
|
|
#dialplan.block_out.number.x =
|
|
|
|
dialplan.block_out.number.1 =
|
|
|
|
#When applying the rule to multiple lines, each line ID separated by comma. E.g. 1,2,3.
|
|
#dialplan.block_out.line_id.x =
|
|
dialplan.block_out.line_id.1 =
|
|
|
|
#Configure the dialnow rule. X ranges from 1 to 20.
|
|
#dialplan.dialnow.rule.x =
|
|
#dialplan.dialnow.line_id.x =
|
|
|
|
dialplan.dialnow.rule.1 =
|
|
dialplan.dialnow.line_id.1 =
|
|
|
|
#Configure the replace rule. X ranges from 1 to 20.
|
|
#dialplan.replace.prefix.x =
|
|
#dialplan.replace.replace.x =
|
|
#dialplan.replace.line_id.x =
|
|
|
|
dialplan.replace.prefix.1 =
|
|
dialplan.replace.replace.1 =
|
|
dialplan.replace.line_id.1 =
|
|
|
|
#######################################################################################
|
|
## BSFT Phonebook ##
|
|
#######################################################################################
|
|
|
|
#Configuration of BW phonebook. X ranges from 1 to 6.
|
|
#bw_phonebook.data.x.server =
|
|
#bw_phonebook.data.x.port =
|
|
#bw_phonebook.data.x.username =
|
|
#bw_phonebook.data.x.password =
|
|
#bw_phonebook.data.x.name =
|
|
|
|
bw_phonebook.data.1.server =
|
|
bw_phonebook.data.1.port =
|
|
bw_phonebook.data.1.username =
|
|
bw_phonebook.data.1.password =
|
|
bw_phonebook.data.1.name =
|
|
|
|
#######################################################################################
|
|
## BSFT Call Log ##
|
|
#######################################################################################
|
|
|
|
#Configuration of the BW call log. X ranges from 1 to 3.
|
|
#bw_call_log.data.x.server =
|
|
#bw_call_log.data.x.port =
|
|
#bw_call_log.data.x.username =
|
|
#bw_call_log.data.x.password =
|
|
#bw_call_log.data.x.name =
|
|
|
|
bw_call_log.data.1.server =
|
|
bw_call_log.data.1.port =
|
|
bw_call_log.data.1.username =
|
|
bw_call_log.data.1.password =
|
|
bw_call_log.data.1.name =
|
|
|
|
#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys;
|
|
#0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
bw.calllog_and_dir =
|
|
|
|
#Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default);
|
|
#Require reboot;
|
|
bw.behave_calllog =
|
|
|
|
#Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default);
|
|
#Require reboot;
|
|
bw.behave_bw_dir =
|
|
|
|
#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled;
|
|
bw.feature_key_sync =
|
|
|
|
#######################################################################################
|
|
## Remote phonebook ##
|
|
#######################################################################################
|
|
|
|
#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5.
|
|
#remote_phonebook.data.x.url =
|
|
#remote_phonebook.data.x.name =
|
|
|
|
{if isset($yealink_remote_phonebook_1_name) }
|
|
remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name}
|
|
{else}
|
|
remote_phonebook.data.1.name = Users
|
|
{/if}
|
|
{if isset($yealink_remote_phonebook_1_url) }
|
|
remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url}
|
|
{else}
|
|
remote_phonebook.data.1.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=users
|
|
{/if}
|
|
|
|
{if isset($yealink_remote_phonebook_2_name) }
|
|
remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name}
|
|
{else}
|
|
remote_phonebook.data.2.name = Groups
|
|
{/if}
|
|
{if isset($yealink_remote_phonebook_2_url) }
|
|
remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url}
|
|
{else}
|
|
remote_phonebook.data.2.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=groups
|
|
{/if}
|
|
|
|
{if isset($yealink_remote_phonebook_3_name) }
|
|
remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name}
|
|
{else}
|
|
remote_phonebook.data.3.name = Extensions
|
|
{/if}
|
|
{if isset($yealink_remote_phonebook_3_url) }
|
|
remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url}
|
|
{else}
|
|
remote_phonebook.data.3.url = http://{$domain_name}/app/provision/?file=directory.xml&contacts=extensions
|
|
{/if}
|
|
|
|
remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name}
|
|
remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url}
|
|
|
|
remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name}
|
|
remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url}
|
|
|
|
#######################################################################################
|
|
## LDAP Settings ##
|
|
#######################################################################################
|
|
#Configure the search criteria for name and number lookups.
|
|
ldap.name_filter =
|
|
ldap.number_filter =
|
|
|
|
ldap.host = 0.0.0.0
|
|
ldap.port = 389
|
|
|
|
ldap.base =
|
|
ldap.user =
|
|
ldap.password =
|
|
|
|
#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50.
|
|
ldap.max_hits =
|
|
|
|
ldap.name_attr =
|
|
ldap.numb_attr =
|
|
ldap.display_name =
|
|
|
|
#Configure the LDAP version. The valid value is 2 or 3 (default).
|
|
ldap.version =
|
|
|
|
#Conifugre the search delay time. It ranges from 0 to 2000 (default).
|
|
ldap.search_delay =
|
|
|
|
#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled;
|
|
ldap.call_in_lookup =
|
|
|
|
#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled;
|
|
ldap.ldap_sort =
|
|
|
|
#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled;
|
|
ldap.dial_lookup =
|
|
|
|
#######################################################################################
|
|
## Phone Features ##
|
|
#######################################################################################
|
|
|
|
#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here;
|
|
#features.dnd_refuse_code = 480
|
|
features.dnd_refuse_code =
|
|
|
|
#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default).
|
|
features.normal_refuse_code =
|
|
|
|
#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled;
|
|
features.call_completion_enable =
|
|
|
|
features.dnd.on_code =
|
|
features.dnd.off_code =
|
|
|
|
#Enable or disable the phone to receive the emergency call when in the DND mode; 0-Disabled, 1-Enabled (default);
|
|
features.dnd.emergency_enable =
|
|
|
|
#Specify the emergency number, multiple numbers (at most three) are separated by comma.
|
|
features.dnd.emergency_authorized_number =
|
|
|
|
#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default);
|
|
call_waiting.enable =
|
|
|
|
#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default);
|
|
call_waiting.tone =
|
|
|
|
#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default);
|
|
features.intercom.allow =
|
|
|
|
#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled;
|
|
features.intercom.mute =
|
|
|
|
#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default);
|
|
features.intercom.tone =
|
|
|
|
#Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default);
|
|
features.intercom.barge =
|
|
|
|
#Specify whether to display the contact name in the remote phonebook; 0-Disabled (default), 1-Enabled;
|
|
features.remote_phonebook.enable =
|
|
|
|
#Set the interval (in seconds) the phone updates the remote phonebook. The default value is 3600.
|
|
features.remote_phonebook.flash_time =
|
|
|
|
#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 2.
|
|
features.hotline_number =
|
|
features.hotline_delay =
|
|
|
|
#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default).
|
|
features.dtmf.repetition =
|
|
|
|
#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5.
|
|
features.busy_tone_delay =
|
|
|
|
#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key;
|
|
features.pound_key.mode =
|
|
|
|
#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default);
|
|
features.send_key_tone =
|
|
features.key_tone =
|
|
|
|
features.redial_tone =
|
|
|
|
#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default);
|
|
features.save_call_history =
|
|
|
|
#Configure the phone to receive the action URI request from the specified IP address(es) or any IP address;
|
|
#Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address);
|
|
features.action_uri_limit_ip =
|
|
|
|
#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default);
|
|
features.dsskey_blind_tran =
|
|
|
|
#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
|
|
features.relog_offtime =
|
|
|
|
#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
|
|
#Require reboot;
|
|
features.direct_ip_call_enable = 0
|
|
|
|
#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset;
|
|
features.ringer_device.is_use_headset =
|
|
|
|
#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled;
|
|
features.pickup.group_pickup_enable =
|
|
|
|
#Configure the group pickup code.
|
|
features.pickup.group_pickup_code =
|
|
|
|
#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled;
|
|
features.pickup.direct_pickup_enable =
|
|
|
|
#Configure the directed pickup code.
|
|
features.pickup.direct_pickup_code =
|
|
|
|
#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator;
|
|
#0-Disabled (default), 1-Enabled;
|
|
features.pickup.blf_visual_enable =
|
|
features.pickup.blf_audio_enable =
|
|
|
|
#Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle.
|
|
#0-Disabled (default), 1-Enabled;
|
|
features.blf_and_callpark_idle_led_enable =
|
|
|
|
#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled;
|
|
#features.factory_pwd_enable =
|
|
|
|
#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4.
|
|
phone_setting.inter_digit_time =
|
|
|
|
#Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1.
|
|
phone_setting.flash_hook_timer =
|
|
|
|
#Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer;
|
|
phone_setting.lock =
|
|
|
|
#Set the unlock password and expiry time (in seconds) of phone lock. It ranges from 0 to 3600, the default value of expiry time is 10.
|
|
phone_setting.phone_lock.unlock_pin =
|
|
phone_setting.phone_lock.lock_time_out =
|
|
|
|
#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wav����Ring8.wav.
|
|
#You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav
|
|
phone_setting.ring_type =
|
|
|
|
#Configure the active backlight level. It ranges from 1 to 10, the default value is 2.
|
|
#The same level for different phones may result in different backlight intensities.
|
|
#The backlight level of T2xP ranges from 1 to 3.
|
|
phone_setting.active_backlight_level =
|
|
|
|
#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1.
|
|
phone_setting.inactive_backlight_level =
|
|
|
|
#Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800.
|
|
phone_setting.backlight_time =
|
|
|
|
#Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800.
|
|
phone_setting.screen_saver_time =
|
|
|
|
#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav.
|
|
#phone_setting.ring_for_tranfailed = Ring1.wav
|
|
phone_setting.ring_for_tranfailed =
|
|
|
|
#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.logon_wizard =
|
|
|
|
#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.predial_autodial = 1
|
|
|
|
#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default);
|
|
phone_setting.is_deal180 =
|
|
|
|
#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1.
|
|
phone_setting.dialnow_delay =
|
|
|
|
#Enable or disable the user to customize the softkey layout; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.custom_softkey_enable =
|
|
|
|
#Configure the phone theme; 0-Theme1 (default), 1-Theme2, 2-Theme3, 3-Theme4;
|
|
phone_setting.theme =
|
|
|
|
#Configure the emergency number, each separated by comma. The default value is 112,911,110.
|
|
phone_setting.emergency.number =
|
|
|
|
#Enable or disable the phone to display the short message automatically; 0-Disabled, 1-Enabled (default);
|
|
phone_setting.sms_popup_enable =
|
|
|
|
#Enable or disable the phone to turn off the power LED when it is idle; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.common_power_led_enable =
|
|
|
|
#Enable or disable the phone to flash the power LED when receiving new voice mail or message; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.mail_power_led_flash_enable =
|
|
|
|
#Enable or disable the phone to flash the power LED when muting a call; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.mute_power_led_flash_enable =
|
|
|
|
#Enable or disable the phone to flash the power LED when placing a calll on hold; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.hold_power_led_flash_enable =
|
|
|
|
#######################################################################################
|
|
## Configure the access URL of firmware ##
|
|
#######################################################################################
|
|
firmware.url = {$yealink_t26p_firmware_url}
|
|
|
|
#######################################################################################
|
|
## Configure the access URL of the customized ringtones ##
|
|
#######################################################################################
|
|
ringtone.url =
|
|
|
|
#ringtone.delete = http://localhost/all,delete all the customized ring tones.
|
|
ringtone.delete =
|
|
|
|
#######################################################################################
|
|
## Configure the access URL of language file ##
|
|
#######################################################################################
|
|
gui_lang.url =
|
|
|
|
#gui_lang.delete =http://localhost/all, delete all the customized languages.
|
|
gui_lang.delete =
|
|
|
|
#######################################################################################
|
|
## Certificates ##
|
|
#######################################################################################
|
|
trusted_certificates.url =
|
|
|
|
#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates.
|
|
trusted_certificates.delete =
|
|
|
|
server_certificates.url =
|
|
|
|
#server_certificates.delete = http://localhost/all, delete the server certificate.
|
|
server_certificates.delete =
|
|
|
|
#######################################################################################
|
|
## Local Contact/DST Time/Dialnow Rule/Replace Rule ##
|
|
#######################################################################################
|
|
local_contact.data.url =
|
|
auto_dst.url =
|
|
dialplan_dialnow.url =
|
|
dialplan_replace_rule.url =
|
|
|
|
#######################################################################################
|
|
## Customized Factory Configurations ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the customized factory configurations.
|
|
custom_factory_configuration.url =
|
|
|
|
#######################################################################################
|
|
## Call List ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the call list.
|
|
#Require reboot
|
|
call_list.url =
|
|
|
|
#######################################################################################
|
|
## OpenVPN ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the open VPN tar.
|
|
openvpn.url =
|
|
|
|
#######################################################################################
|
|
## Super Search URL ##
|
|
#######################################################################################
|
|
super_search.url =
|
|
|
|
#######################################################################################
|
|
## Directory Setting ##
|
|
#######################################################################################
|
|
#Configure the access URL of the directory setting file.
|
|
directory_setting.url = {$yealink_directory_setting_url}
|
|
|
|
#######################################################################################
|
|
## Configure the access URL of the Wallpaper ##
|
|
#######################################################################################
|
|
wallpaper_upload.url = {$yealink_t26p_wallpaper}
|
|
|
|
#Configure the phone background.
|
|
#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png
|
|
#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png
|
|
phone_setting.backgrounds = Config:yealink_t26p_wallpaper.png
|
|
|
|
#######################################################################################
|
|
## Configure the access URL of the Screensaver ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the customized wallpaper.
|
|
screen_saver.pic.url = {$yealink_t26p_screen_saver}
|
|
|
|
#######################################################################################
|
|
## Configuration files for Var ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the files for var.
|
|
#Require reboot
|
|
web_item_level.url =
|
|
|